Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

82V3399BNLG is an integrated, single-chip solution for the Synchronous Equipment Timing Source for Stratum 3, 4E, 4, SMC, EECOption1, EEC-Option2 clocks in SONET / SDH / Synchronous Ethernet equipment, DWDM and Wireless base station.

Feature of 82V3399BNLG

Single chip PLL

Features 0.5 mHz to 560 Hz bandwidth

Provides node clock for ITU-T G.8261/G.8262 Synchronous Ethernet (SyncE)

Exceeds GR-253-CORE (OC-192) and ITU-T G.813 (STM-64) jitter generation requirements

Provides node clocks for Cellular and WLL base-station (GSM and 3G networks)

Provides clocks for DSL access concentrators (DSLAM), especially for Japan TCM-ISDN network timing based ADSL equipments

Provides clocks for 1 Gigabit and 10 Gigabit Ethernet applications

It supports clock generation for IEEE-1588 application

Provides an integrated single-chip solution for Synchronous Equipment Timing Source, including Stratum 3, 4E, 4, SMC, EEC-Option 1 and EEC-Option 2 Clocks

Provides SONET clocks with less than 1 ps of RMS Phase Jitter (12 kHz - 20 MHz)

Supports 1PPS input and output

Employs PLL architecture to feature excellent jitter performance and minimize the number of the external components

Integrates T0 DPLL and T4 DPLL

T4 DPLL locks independently or locks to T0 DPLL

Supports programmable DPLL bandwidth (0.5 mHz to 560 Hz in 19 steps) and damping factor (1.2 to 20 in 5 steps)

Supports 1.1X10-5 ppm absolute holdover accuracy and 4.4X10-8 ppm instantaneous holdover accuracy

Supports hitless reference switching to minimize phase transients on T0 DPLL output to be no more than 0.61 ns

Supports programmable input-to-output phase offset adjustment

Limits the phase and frequency offset of the outputs

Provides OUT1~OUT6 output clocks whose frequencies cover from 1 Hz (1PPS) to 644.53125 MHz

Includes 25 MHz, 125 MHz and 156.25 MHz for CMOS outputs

Includes 25.78125 MHz, 128.90625 MHz, 161.1328125 MHz, for CMOS outputs

Includes 25 MHz,125 MHz, 156.25 MHz, 312.5 MHz and 625 MHz for differential outputs

Includes 25.78125 MHz, 128.90625 MHz, 161.1328125 MHz, 322.265625 MHz and 644.53125 MHz for differential outputs

Provides IN1~IN6 input clocks whose frequencies cover from 1 (1PPS) to 625 MHz

Includes 25 MHz, 125 MHz and 156.25 MHz for CMOS inputs

Includes 25 MHz, 156.25 MHz, 312.5 MHz and 625 MHz for differential inputs

Internal DCO can be controlled by an external processor to be used for IEEE-1588 clock generation

Supports Forced or Automatic operating mode switch controlled an internal state machine. It supports Free- Run, Locked and Holdover modes

Supports manual and automatic selected input clock switch

Supports automatic hitless selected input clock switch on clock failure

Supports three types of input clock sources: recovered clock from STM-N or OC-n, PDH network synchronization timing and external synchronization reference timing

Provides a 2 kHz, 4 kHz, or 8 kHz frame sync input signal, and kHz or 8 kHz frame sync output signal

Provides a 1PPS sync input signal and a 1PPS sync output signal

Provides output clocks for BITS, GPS, 3G, GSM, etc.

Supports PECL/LVDS and CMOS input/output technologies

Supports master clock calibration

Supports Master/Slave application (two chips used together) enable system protection against single chip failure

Supports Telcordia GR-1244-CORE, Telcordia GR-253-CORE, ITU-T G.812, ITU-T G.8262. ITU-T G.813 and ITU-T G.783 recommendations

I2C and Serial microprocessor interface modes

IEEE 1149.1 JTAG Boundary Scan

Single 3.3 V operation with 5 V tolerant CMOS I/Os

72-pin QFN package, green package options available

Applications of 82V3399BNLG

1 Gigabit Ethernet and 10 Gigabit Ethernet

BITS/SSU

SMC/SEC (SONET/SDH)

DWDM cross-connect and transmission equipment

Synchronous Ethernet equipment

Central office timing source and distribution

Core and access IP switches/routers

Gigabit and Terabit IP switches/routers

IP and ATM core switches and access equipment

Cellular and WLL base station node clocks

Broadband and multi-service access equipment

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.