sales@hkmjd.com
Service Telephone:86-755-83294757
Trade Name:Synchronous Buck Regulator
Brand:ADI
Particular Year:22+
Package:MSOP-10
Delivery Date:New and Original
Stock: 5000pcs
The LT8607EMSE is a compact, high-efficiency, high-speed synchronous single-chip buck switching regulator with a non-switching transient current power consumption of only 1.7 µ A. The LT8607EMSE can provide 750mA continuous current. The low ripple burst mode of operation maintains high efficiency at very low output currents while keeping the output ripple below 10mVP-P. Internal compensation with peak current mode topology allows the use of small inductance, providing fast transient response and good loop stability. The EN/UV pin has an accurate 1V threshold and can be used to program the VIN undervoltage to lock or turn off the LT8607EMSE, reducing the input supply current to 1 µ A.
LT8607EMSE Product Features
Wide input voltage range: 3.0 V to 42V
Ultra-low quiescent current burst mode ® operation
< 3 µ A IQ (adjust 12VIN to 3.3 VOUT)
Output ripple < 10mVP-P
High efficiency 2MHz synchronous operation
> 93% efficiency (0.5 A, 12VIN to 5VOUT)
Maximum continuous output current: 750mA
Minimum fast conduction time: 35ns
Adjustable and synchronizable frequency range: 200kHz to 2.2 MHz
Small inductors allowed
Spread spectrum for low EMI
Low dropout
Peak current operating mode
Accurate 1V enable pin threshold
Internal compensation
Output soft start and tracking
Small Thermal Enhanced 10-Pin MSOP Package
Certified for AEC-Q100 automotive applications
LT8607EMSE Product Application
General purpose buck converter
Low EMI buck
Model
Brand
Package
Quantity
Describe
ADI
LQFN-16
5000
42V, 2A / 3A peak synchronous buck regulator with 2.5μA quiescent current
ADI
LQFN-32
5000
65V, 8A Silent Switcher® 2 Architecture Synchronous Buck Regulator, LQFN32
A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.
A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.
A: at present, our self-employed brands TI,ST,ADI,NXP,LATTICE,CYPRESS,INFINEON,XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.
A: You can inquire through the website, or by phone and email.
A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.
A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.
The full name of Analog Devices is Analog Devices, Inc. (ADI). As an outstanding supplier specializing in semiconductor sensors and signal processing ICs, adi regards innovation, performance and excellence as the cultural pillars of the company and ha…
LTM4654IY
The LTM4654IY is a DC/DC step-down μModule power module launched by ADI. It is a four-channel regulator designed to provide an output current of up to 25A within an input voltage range of 20V to 55V. Its technical features are as follows:Input voltag…LTM4654EY
The LTM4654EY hybrid step-down Module bus converter is a complete 300W output pull-up/potting current switching mode hybrid topology step-down DC-DC power μModule (micro module) bus converter. The LTM4654EY is designed to provide an output current of…LTM4707IY
The LTM4707IY is a complete 16A step-down Silent Switcher 3 power μModule regulator in a tiny 6.25mm 6.25mm 5.07mm BGA package. This package contains a switch controller, power MOSFET, inductor and supported components.CharacteristicsProvide comple…AD9528BCPZ
The AD9528BCPZ is a two-stage PLL with an integrated JESD204B/JESD204C SYSREF generator, which can be used for multi-device synchronization. Its technical parameters are as follows:PLL: With bypassInput: CMOS, HSTL, LVDSOutput: HSTL, LVDSNumber of cir…AD9522-5BCPZ
The AD9522-5BCPZ is a highly CMOS output clock generator launched by (ADI), integrating a VCO, clock divider, and up to 24 outputs. It supports automatic hold and flexible reference input circuits, making it suitable for scenarios that require high-pr…AD9549ABCPZ
The AD9549ABCPZ device provides synchronization for many systems, including synchronous fiber optic networks (SONET/SDH). The AD9549ABCPZ can generate an output clock synchronized with one of the two external input references. The external reference m…Contact Number:86-755-83294757
Enterprise QQ:1668527835/ 2850151598/ 2850151584/ 2850151585
Business Hours:9:00-18:00
E-mail:sales@hkmjd.com
Company Address:Room1239, Guoli building, Zhenzhong Road, Futian District, Shenzhen, Guangdong
CopyRight ©2022 Copyright belongs to Mingjiada Yue ICP Bei No. 05062024-12
Official QR Code
Links: