Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

HMC1118LP3DE: RF Switch - 9kHz to 13GHz, High Isolation SPDT Non-Reflective Switch, LFCSP-16 

Model: HMC1118LP3DE 

Package: LFCSP-16 

Type: RF Switch

The HMC1118LP3DE is a general-purpose, broadband, non-reflective single-pole, double-throw (SPDT) switch in an LFCSP surface-mount package. The switch has a frequency range of 9 kHz to 13.0 GHz with high isolation and low insertion loss. The switch has an isolation performance of 48 dB or more, an insertion loss of 0.68 dB at 8.0 GHz and below, and a build-up time of 7.5 μs for a 0.05 dB margin on the final RFOUT.The switch operates with a positive control voltage logic line of +3.3 V and 0 V, and requires +3.3 V and -2.5 V power supplies.

HMC1118LP3DE Product Features: 

Non-reflective 50 Ω design 

Positive control voltage: 0/+3.3 V 

Low insertion loss: 0.68 dB (at 8.0 GHz) 

High isolation: 48 dB (at 8.0 GHz) 

High power handling: 

35 dBm (pass-through path) 

27 dBm (terminated path) 

High linearity: 

1 dB compression (P1dB): 37 dBm ( typical) 

Output third order intermodulation intercept (IIP3): 62 dBm (typical) 

ESD rating: 2kV Human Body Model (HBM) 

3 x 3 mm 16-pin LFCSP package 

No low frequency spurious 

HMC1118LP3DE Applications: 

Test instrumentation 

Microwave radio and very small aperture terminal (VSAT) 

Fibre-optic and broadband telecommunications ADL5513ACPZ: RF Power Detector - 1 MHz ~ 4 GHz , 80dB, Log Detector/Controller 

RF Power Detector - Demodulated Log Amplifier, LFCSP-16 

Model: ADL5513ACPZ 

Package: LFCSP-16 Type: RF Power Detector 

Overview: 

The ADL5513ACPZ is a demodulated logarithmic amplifier capable of accurately converting radio frequency (RF) input signals to the appropriate decibel scale output.The ADL5513 uses progressive compression in cascaded amplifier links, with each stage of the link equipped with a detector unit.

The ADL5513ACPZ can be used in measurement or controller mode. For signals above 4 GHz, the ADL5513 maintains accurate logarithmic coherence. Typical input dynamic range is 80 dB (impedance: 50 Ω) with an error of less than ±3 dB. 

The ADL5513ACPZ has a response time of 10 ns and is capable of detecting RF pulses for pulse rates in excess of 50 MHz. The device provides unmatched logarithmic intercept stability over ambient temperature conditions.The ADL5513 operates from a supply voltage of 2.7 V to 5.5 V and consumes less than 30 mA of power, with lower currents when the device is disabled.

ADL5513ACPZ Product Features: 

Wide bandwidth: 1 MHz to 4 GHz 

Dynamic range: 80 dB (±3 dB) 

Temperature stability: < ±0.5 dB 

Low-noise measurement/controller output (VOUT) 

Impulse response time: 10 ns 

Small package size: 3 mm x 3 mm LFCSP 

Supply: 2.7 to 5.5 V (30 mA) 

Manufactured on a high-speed SiGe process ADL5513 consumes less than 30 mA. Manufactured on SiGe process 

ADL5513ACPZ Applications: 

RF transmitter amplifier setpoint control and level detection 

Power detection in wireless link transmitters 

RSSI measurement in base stations, WLAN, WiMAX, radar

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.