sales@hkmjd.com
Service Telephone:86-755-83294757
Trade Name:Electronic Fuses
Brand:TI
Particular Year:25+
Package:QFN-16
Delivery Date:New and Original
Stock: 19000pcs
The TPS2420RSAR device provides highly integrated load protection for applications up to 20-V. The maximum UV turn-on threshold of 2.9 V makes the TPS2420RSAR well suited to standard bus voltages as low as 3.3 V. The TPS2420RSAR device protects loads, minimizes inrush current, and safely shuts down in the event of a fault. The programmable fault current threshold starts the fault timer while allowing the current to pass to the load uninhibited. The programmable current limit threshold sets the maximum current allowed into the load, for both inrush and severe load faults. Both events use the programmable timer which inhibits all current to the load when it expires.
The dual protection thresholds are useful in applications such as disk drives. The start-up and seek currents are typically higher than the nominal current and during this time the load needs a low impedance path to deliver the power. If a failure at the load occurs, the current limit does not allow the current to exceed the programmed threshold. This protects both the load and the integrity of the power supply. The internal MOSFET is protected by power limit circuitry which ensures that the MOSFET remains within its safe operating area (SOA) during all operating states.
The TPS2420RSAR device also allows the system to monitor load currents with no need for a shunt in the power path. The gain of the current monitor can be scaled to the application. Fault and power good outputs are provided for improved system management and sequencing control.
This device can be programmed to either latch-off or retry in the event of a fault. All of this functionality is packed into a 16-pin 4 × 4 mm QFN package.
TPS2420RSAR Features
Integrated 30-mΩ Pass MOSFET
Up to 20-V Bus Operation
Programmable Fault Current
Programmable Hard Current-Limit
Programmable Fault Timer
Internal MOSFET Power Limiting Foldback
Latching and Auto-Retry Operation
Analog Current Monitor Output
Powergood Output
Fault Output Indicator
4 mm × 4 mm QFN
–40°C to 125°C Junction
Temperature Range
UL2367 Recognized - File Number E169910
TPS2420RSAR Applications
• RAID Arrays
• Telecommunications
• Plug-In Circuit Boards
• Disk Drives
• SSDs
• PCIE
• Fan Control
Model
Brand
Package
Quantity
Describe
TI
WSON-8
15000
2.7V to 18V, 34mΩ, 0.5A to 4A Electronic Fuses with Overvoltage Protection
TI
SOIC-8
20000
4.5V to 18V, 90mΩ, 0.4A to 1.6A Electronic Fuse with Auto Retry Fault Response
TI
10-VFDFN
1000
4.5V to 60V, 478mΩ, 0.025A to 0.88A Electronic Fuses with Integrated Input and Output Reverse Polarity Protection
TI
10-VFDFN
1000
4.5V to 60V, 478mΩ, 0.025A to 0.88A Electronic Fuses with Integrated Input and Output Reverse Polarity Protection
A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.
A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.
A: at present, our self-employed brands TI,ST,ADI,NXP,LATTICE,CYPRESS,INFINEON,XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.
A: You can inquire through the website, or by phone and email.
A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.
A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.
Texas Instruments (TI), abbreviated as TI, is the worlds leading semiconductor company providing innovative digital signal processing (DSP) and analog device technologies for real-world signal processing. In addition to the semiconductor business, it …
DP83TC811SWRNDRQ1
The DP83TC811SWRNDRQ1 Low Power Automotive PHYTER 100BASE-T1 Ethernet Physical Layer Transceiver provides the physical layer functionality required for transmitting and receiving data over shielded single twisted pair cable. The device enables xMII fl…M0G3105QRHBRQ1
The M0G3105QRHBRQ1 is an 80MHz, 32-bit ARM Cortex-M0+ microcontroller IC based on the enhanced Arm Cortex-M0+ 32-bit core platform that operates at up to 80MHz. The M0G3105QRHBRQ1 provides high-performance analogue peripheral integration, supports an …M0G3105QRGZRQ1
M0G3105QRGZRQ1: 32-bit Microcontroller MCU - Automotive Mixed-signal microcontroller with CAN-FD interface, VQFN-48 Product Details: Model: M0G3105QRGZRQ1 Package: VQFN-48 Type: 32-bit Microcontroller - MCU Mounting Style: SMD/SMT Package / Case: VQF…OPA2191IDR
The OPA2191IDR is a low-power, 36V, e-trim™ CMOS precision operational amplifier introduced by Texas Instruments, packaged in an SOIC-8 package, and part of the OPAx191 series (including the OPA191, OPA2191, and OPA4191). This chip features ultra-low…OPA2196IDGKR
The OPA2196IDGKR is a dual-channel, low-noise, zero-drift precision operational amplifier introduced by Texas Instruments (TI), packaged in an 8-pin VSSOP (DGK) package.DS125MB203SQ
The DS125MB203SQ device is a dual-port 2:1 multiplexer and 1:2 switch or fan-out buffer with signal conditioning capabilities, suitable for data transmission rates up to 12.5 Gbps in 10GE, 10G-KR (802.3ap), Fibre Channel, PCIe, wireless bandwidth, SAT…Contact Number:86-755-83294757
Enterprise QQ:1668527835/ 2850151598/ 2850151584/ 2850151585
Business Hours:9:00-18:00
E-mail:sales@hkmjd.com
Company Address:Room1239, Guoli building, Zhenzhong Road, Futian District, Shenzhen, Guangdong
CopyRight ©2022 Copyright belongs to Mingjiada Yue ICP Bei No. 05062024-12
Official QR Code
Links: