Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The MAX20010CATPY/V+ is a high efficiency, synchronous, step-down converter that operates over a 3.0V to 5.5V input voltage range and provides a 0.5V to 1.5875V output voltage range. The wide input/output voltage range and load drive capability of up to 6A make the IC ideal for on-board point-of-load and back-end regulator applications. the IC has an output accuracy of ±2% over the full load, supply and temperature range.

The IC can operate in 2.2MHz fixed frequency PWM mode, providing improved noise immunity and load transient response, or in pulsed frequency modulation mode (SKIP) for more efficient operation under light load conditions. 2.2MHz operating frequency allows the use of full ceramic capacitors, minimising the footprint of the solution. Programmable spread spectrum modulation maximises the suppression of electromagnetic emissions. Integrated low RDS(ON) switch greatly improves efficiency at heavy loads and simplifies circuit layout compared to discrete solutions.

The IC has factory preset output voltages (see ordering information for options.) The I2C interface provides dynamic voltage regulation with programmable swing rates. Other features include programmable soft-start, over-current and over-temperature protection.

Features

Fully integrated, synchronous, 6A DC-DC converter supporting small solution sizes

3.0V to 5.5V operating voltage

High precision voltage regulator for application processors

±2% output voltage accuracy

Differential far-end voltage detection

I2C controlled 0.5V to 1.27V output voltage in 10mV steps; or 0.625V to 1.5875V in 12.5mV steps

Excellent load transient performance

Low noise characteristics reduce EMI

2.2MHz operating frequency

Spread spectrum option

Frequency synchronous input/output

Current mode, forced PWM or jump pulse operation modes

Reliability to support automotive environments

PGOOD output

Over-temperature and short-circuit protection

20-pin (4mm × 4mm) TQFN package with bare pads

-40°C to +125°C operating temperature range

AECQ-100 certified

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.