Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The MP6605DGR-P is a 4-channel low-side MOSFET (LS-FET) driver IC that integrates four LS-FETs and high-side (HS) clamp diodes to drive inductive loads. It is well-suited for unipolar stepper motor and solenoid driver applications.

The device can achieve up to 1.5A of output current (IOUT) across a wide 4.5V to 60V input voltage (VIN) range. The maximum voltage of the motor driver output pins is 60V.

Full protection features include over-current protection (OCP), under-voltage lockout (UVLO) protection, and thermal shutdown.

Features & Benefits

Wide 4.5V to 60V Input Voltage (VIN) Range

60V Maximum Winding Clamp Voltage (VCLAMP)

Four Low-Side MOSFETs (LS-FETs) and Four High-Side (HS) Clamp Diodes

350mΩ MOSFET On Resistance

1.5A Maximum Output Current (IOUT) while One LS-FET Is On, or 700mA Maximum IOUT while Four LS-FETs Are On

Over-Current Protection (OCP)

Under-Voltage Lockout (UVLO) Protection

Thermal Shutdown

Fault Indication Output

Control Power Supply Not Required

Simple Logic Interface

3.3V and 5V Compatible Logic Supply

Available in a QFN-24 (4mmx4mm) Package

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.