sales@hkmjd.com
Service Telephone:86-755-83294757
Trade Name:MAX17574ATG
Data Manual:MAX17574ATG.pdf
Brand:Maxim
Particular Year:23+
Package:TQFN-24
Delivery Date:New and Original
Stock: 2500pcs
The MAX17574ATG is a high efficiency, high voltage, synchronous step-down DC-DC converter with a built-in MOSFET that operates over a 4.5V to 60V input voltage range. The converters can deliver up to 3A of current. The output voltage can be set from 0.9V up to 90% of VIN. feedback voltage regulation accuracy is ±0.9% over the -40°C to +125°C temperature range.
The MAX17574ATG utilizes a peak current mode control architecture. The device can operate under pulse width modulation (PWM), pulse frequency modulation (PFM), or discontinuous conduction mode (DCM) control methods. A programmable soft-start feature allows the user to reduce input inrush current. The device also features an output enable/undervoltage lockout pin (EN/UVLO) that allows the user to turn the device on when the input voltage reaches the appropriate requirement. When the output voltage reaches the regulated range, a low active RESET open-drain output is triggered after a certain delay to provide a power-ready indication for the system.
The MAX17574ATG is available in a 24-pin (4mm x 5mm) TQFN package. Emulation mode is provided.
Product Features
Reduced external components for lower overall cost
Schottky-free synchronous operation
Internal compensation for stable operation at any output voltage
All ceramic capacitor design for compact layout
Reduced inventory list of DC-DC regulators
Wide input voltage range of 4.5V to 60V
Adjustable output voltage range from 0.9V+ to 90% VIN
Provides up to 3A current over the entire temperature range
100kHz to 2.2MHz adjustable switching frequency range with out-of-band synchronization
Reduced power consumption
Higher than 90% peak efficiency
PFM and DCM modes for high efficiency at light loads
Auxiliary bootstrap LDO for improved efficiency
2.8μA shutdown current
Reliable operation in harsh industrial environments
Hiccup overload protection
Adjustable soft-start and pre-bias power-up
Built-in output voltage monitoring with active-low RESET pin
Programmable EN/UVLO thresholds
Monotonic entry into pre-biased load state at startup
Over Temperature Protection
Industrial grade high temperature -40°C to +125°C
Applications
Base station power supplies
Power distribution regulators
General purpose point-of-load power supplies
High voltage, single board systems
Industrial control power supplies
Wall Transformer Voltage Regulators
Model
Brand
Package
Quantity
Describe
Maxim
TQFN-32
3000
4.5V - 16V, dual-channel 3A output, high-efficiency, synchronous step-down DC-DC converter
MPS
QFN-22
2500
5A, 36V, fully integrated USB PD solution with integrated buck-boost converter
MPS
QFN-22
2500
5A, 36V, fully integrated USB PD solution with integrated buck-boost converter
ADI
FC2QFN-23
2000
8A Synchronous Buck Converters with Multiphase Capability and ASIL B Safety Level
TI
WSON-12
30000
3.3V to 10V Input, 300mA Ultra-Low Iq Buck Converter with VSEL and Input Voltage Switching
A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.
A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.
A: at present, our self-employed brands TI,ST,ADI,NXP,LATTICE,CYPRESS,INFINEON,XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.
A: You can inquire through the website, or by phone and email.
A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.
A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.
Maxim was founded in 1983 and is headquartered in California, USA. The company is a leader in the design, development, and production of linear and mixed-signal integrated circuit products. As of June 26, 1999, its net sales revenue has reached 600 mi…
MAX17509ATJ
The MAX17509ATJ is a dual 3A high-efficiency synchronous step-down DC-DC converter with 4.5V to 16V input voltage range that supports resistor programming. This device can be configured as two independent 3A power supplies or one dual-phase 6A powe…MAX17559ACJ
The MAX17559ACJ is a dual-output, synchronous step-down controller used to drive NMOSFETs. This device adopts peak current control mode and fixed frequency architecture.Technical SpecificationOutput type: Transistor driverFunction: Lower blood pressur…MAX6749KA
The MAX6749KA is a low-power, microprocessor (P) monitoring circuit designed to monitor single- or dual-supply system voltages ranging from 1.575V to 5V, providing stable reset output and watchdog functionality.MAX9724BETC
The MAX9724BETC is a low-power, high-performance stereo headphone amplifier from Maxim that uses DirectDrive technology and is suitable for portable audio devices.MAX1556ETB
The MAX1556ETB is a low-current (16A), fixed-frequency buck regulator.MAX33049EASD
The MAX33049EASD is a 40kV ESD-protected full-duplex RS-485/RS-422 transceiver with an operating voltage range of 3.0V to 5.5V. It is designed flexibly and supports robust communication up to 20Mbps.The MAX33049EASD transceiver is optimized for robust…Contact Number:86-755-83294757
Enterprise QQ:1668527835/ 2850151598/ 2850151584/ 2850151585
Business Hours:9:00-18:00
E-mail:sales@hkmjd.com
Company Address:Room1239, Guoli building, Zhenzhong Road, Futian District, Shenzhen, Guangdong
CopyRight ©2022 Copyright belongs to Mingjiada Yue ICP Bei No. 05062024-12
Official QR Code
Links: