Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The NCS21671DM050R2G is a series of voltage output current sense amplifiers with 50V. These devices measure the voltage across the shunt at common-mode voltages from -0.1 V to 40 V, independent of supply voltage. The low offset of the zero-drift architecture enables current sensing with voltage drops as low as 10 mV full scale across the sense resistor. An optional enable function reduces current consumption through the input and supply pins to negligible levels. Two optional pins simplify input filtering. The devices operate from a single +1.8 V to +5.5 V supply with a maximum supply current of 40 μA.G The devices are available in the Micro10 package.

Product Attributes

Amplifier Type: Current Sense  

Number of circuits: 1  

Output Type: Full Swing  

Slew rate: 0.4V/µs  

-3db Bandwidth: 20 kHz  

Current - Input Bias: 30 µA  

Voltage - Input Compensation: 30 µV  

Current - Supply: 35µA  

Voltage - Span (min): 1.8 V  

Voltage - Span (Max): 5.5 V  

Operating Temperature: 150°C (TJ)  

Mounting Type: Surface Mount  

Package/Housing: 10-TFSOP, 10-MSOP (0.118", 3.00mm Width)  

Supplier Device Package: 10-Miniature

Typical Applications

Power bus monitoring

Battery current monitors

Lighting Barcodes

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.