Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

ADBMS1816CSWZ: 6-Channel Multi-Cell Battery Monitor, LQFP-48

Model: ADBMS1816CSWZ

Package: LQFP-48

Type: Battery Management - Battery Monitor

The ADBMS1816CSWZ is a multi-cell battery stack monitor that measures up to six series-connected cells with a total measurement error (TME) of less than 1.5 mV. The ADBMS1816CSWZ has a cell measurement range of 0 V to 5 V, suitable for most battery chemistry applications. All six cell voltage measurements can be made in 304 μs, and a lower data acquisition rate can be selected for high noise rejection.

ADBMS1816CSWZ Product Features:

Measures up to six series-connected battery cells

Maximum total lifetime measurement error: 1.5mV

Stackable architecture supports hundreds of cells

Built-in isoSPI interface

- 2Mbps isolated serial communication

- Up to 20 metres using a single twisted pair cable

- Low EMI susceptibility and emissions

- Bi-directional wire break protection

- Capacitor or transformer coupling

Hot-swappable, no external protection required

Designed for high reliability systems

- Includes redundant unit measurements

- Diagnostic range in operating mode

Measures all units in the system in just 304 μs

16-bit ADC with programmable noise filters

Passive cell balancing up to 300mA per channel with programmable PWMs

7 GPIOx ports or analogue inputs

- Temperature or other sensor inputs

- Configurable as an I2C or SPI master device

Accommodates ±5 V bus voltage

Sleep mode supply current: 5.5µA

48-pin LQFP package with exposed pads

AEC-Q100 for automotive applications

Applications:

Electric and hybrid vehicles

Battery backup systems

Grid energy storage

High power portable devices

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.