sales@hkmjd.com
Service Telephone:86-755-83294757
Trade Name:Battery Management
Brand:ADI
Particular Year:25+
Package:QFP80
Delivery Date:New and Original
Stock: 2000pcs
The ADBMS6830MSW is a multi-cell battery pack monitor that can measure up to 16 series-connected battery cells with a total lifetime measurement error (TME) of less than 2 mV over the full temperature range.The ADBMS6830MSW has a measurement input range of -2 V to +5.5 V, suitable for most battery chemistry applications, and can measure busbar voltage. Provision is made to bypass the busbar without specifying any measurement channels.
All cells can be measured simultaneously and redundantly using two separate analogue-to-digital converters (ADCs). A continuously running ADC with a high sampling rate of 4.096 MHz reduces external analogue filtering and results in alias-free measurements. A subsequent programmable infinite impulse response (IIR) filter enables even higher noise reduction.
Multiple ADBMS6830MSWs can be connected in series to simultaneously monitor longer strings of high-voltage batteries. Each ADBMS6830MSW has an isolated serial port interface (isoSPI ™) for high-speed communication over long distances without RF interference. Multiple devices are daisy-chained to the host processor. The daisy chain operates in both directions, ensuring communication integrity even if there is an error in the communication path.
ADBMS6830MSW Product Features
Measures the voltage of up to 16 series-connected cells
Maximum lifetime TME: ±1.8 mV (3.3 V per battery cell, -40°C to +125°C)
Simultaneous and continuous measurement of cell voltage
Configurable integrated low-pass filtering
Stackable architecture for high voltage battery packs
Built-in isoSPI interface
2 Mbps isolated serial communication
Uses a single twisted pair cable up to 20 metres per segment
Low EMI sensitivity and radiation
Bi-directional wire break protection
Coupling capacitor or transformer
Supports hot-swapping without external protection
Passive cell balancing up to 300 mA per channel with programmable pulse width modulation
Up to 10 general-purpose analogue inputs or digital I/Os
Temperature or other sensor inputs
Configurable as I2C or SPI host
LPCM for battery cell and temperature monitoring in shutdown state
Sleep mode supply current: 4 μA
Bus configuration
AEC-Q100 certified for automotive applications
ADBMS6830MSW Applications
Electric and hybrid vehicles
Battery backup systems
Grid energy storage
Model
Brand
Package
Quantity
Describe
ADI
SSOP-44
4000
12 Channel Multicell Battery Monitor with Addressable Interface, Generation 2
NXP
LQFP64
8000
Battery Management Battery Cell Controller, Premium, 14 Channels, SPI, LQFP64
A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.
A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.
A: at present, our self-employed brands TI,ST,ADI,NXP,LATTICE,CYPRESS,INFINEON,XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.
A: You can inquire through the website, or by phone and email.
A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.
A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.
The full name of Analog Devices is Analog Devices, Inc. (ADI). As an outstanding supplier specializing in semiconductor sensors and signal processing ICs, adi regards innovation, performance and excellence as the cultural pillars of the company and ha…
LT3502AEDC
The LT3502AEDC is a current-mode PWM buck DC/DC converter with an internal 500mA power switch, housed in a compact 8-pin 2mm x 2mm DFN package.AD1582ARTZ
The AD1582ARTZ is a low-cost, low-power, low-dropout, precision bandgap reference voltage source. These are three-pin (series) devices housed in a compact 3-pin SOT-23 surface-mount package.ADP5135ACPZ
The ADP5135ACPZ integrates three high-performance step-down regulators. It adopts a 24-pin, 4 mm x 4 mm LFCSP package. The high switching frequency of this step-down regulator supports small multi-layer external devices and reduces the circuit board s…ADP2230ACPZ
The ADP2230ACPZ is an integrated device featuring two high-efficiency, low static current, 800 mA, step-down, DC-DC converters. It is available in a small 10-pin 3 mm 3 mm LFCSP package. The entire solution only requires five small external component…ADP5310AREZN-3.3
The ADP5310AREZN-3.3 device adopts a 16-pin TSSOP_EP package, integrating two step-down regulators and a load switch, which can meet the strict performance and circuit board space requirements. The ADP5310AREZN-3.3 can be directly connected to a wide …ADP5310AREZN-255
The ADP5310AREZN-255 is a 3-channel, integrated ultra-low power solution with a dual-channel black regulator and load switch produced by (ADI). The ADP5310AREZN-255 can be directly connected to a wide input voltage range of 2.7V to 15.0V, allowing it …Contact Number:86-755-83294757
Enterprise QQ:1668527835/ 2850151598/ 2850151584/ 2850151585
Business Hours:9:00-18:00
E-mail:sales@hkmjd.com
Company Address:Room1239, Guoli building, Zhenzhong Road, Futian District, Shenzhen, Guangdong
CopyRight ©2022 Copyright belongs to Mingjiada Yue ICP Bei No. 05062024-12
Official QR Code
Links: