Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

82V3396NLG dual Synchronous Ethernet line card PLL is used to synchronize line cards in Synchronous Ethernet and SONET/SDH equipment, and wireless base stations. The two independent timing paths allow the device to simultaneously synchronize transmit interfaces with the selected system backplane clock, and provide a recovered clock from a selected receive interface to the system backplane.

Feature of 82V3396NLG

Integrates two DPLLs; one can be used on the transmit path and the other on the receive path

Provides node clock for ITU-T G.8261/G.8262 Synchronous Ethernet (SyncE)

Exceeds GR-253-CORE (OC-12) and ITU-T G.813 (STM-4) jitter generation requirements

Provides node clocks for Cellular and WLL base-station (GSM and 3G networks)

Provides clocks for 1 Gigabit and 10 Gigabit Ethernet applications

Supports programmable DPLL bandwidth: 18Hz, 35Hz, 70Hz, and 560Hz

Provides OUT1~OUT6 output clock frequencies up to 644.53125MHz

Provides IN1~IN6 input clock frequencies cover from 2kHz to 156.25MHz

Supports manual and automatic selected input clock switch

Supports automatic hitless selected input clock switch on clock failure

Provides a 2kHz, 4kHz, or 8kHz frame sync input signal, and a 2kHz or 8kHz frame sync output signals

Provides a 1PPS sync input signal and a 1PPS sync output signal

Provides output clocks for BITS, GPS, 3G, GSM, etc.

Supports master clock calibration

Supports Telcordia GR-1244-CORE, Telcordia GR-253-CORE, ITU-T G.812, ITU-T G.8262. ITU-T G.813 and ITU-T G.783 recommendations

I²C and Serial microprocessor interface modes

IEEE 1149.1 JTAG Boundary Scan

Applications of 82V3396NLG

1 Gigabit Ethernet and 10 Gigabit Ethernet

BITS/SSU

SMC/SEC (SONET/SDH)

DWDM cross-connect and transmission equipment

Synchronous Ethernet equipment

Central Office Timing Source and Distribution

Core and access IP switches/routers

Gigabit and Terabit IP switches/routers

IP and ATM core switches and access equipment

Cellular and WLL base station node clocks

Broadband and multi-service access equipment

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.