Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The LTM8080MPY is a 40VIN, dual 500mA or single 1A ultra low noise, ultra high PSRR μModule regulator.

Features:

Integrated switching step-down type regulators provide support for dual Ldos

Low noise Silent Switcher® architecture with integrated EMI noise reduction

Comply with CISPR22 Class B and CISPR25 Class 5 standards

Ultra-low output RMS noise: <1μVRMS (10Hz to 100kHz)

Ultra-low output point noise: 2nV/√Hz at 10kHz

Ultra-high PSRR: 80dB at 100kHz

Wide input voltage range: 3.5V to 40V

Wide output voltage: 0V to 8V

Double 500mA continuous current, TA = 85°C

Voltage tracking to minimize power loss

100μA SET pin current with ±1% initial accuracy

Optional switching frequency: 200kHz to 2.2MHz

External synchronization

Programmable power supply is normal

Can be paralleled to achieve lower noise and higher current

9mm x 6.25mm x 3.32mm BGA

Description:

The LTM8080 has a cascading architecture that includes a 40VIN step-down Silent Switcher regulator with the integrated EMI noise reduction required for dual high-performance low-drop linear regulators. The dual LDO uses ADI's ultra-low noise and ultra-high PSRR architecture to power noise-sensitive applications. The LTM8080 is an integrated solution with Switcher and LDO, which has the dual advantage of keeping the size small and significantly reducing PCB layout sensitivity.

Applications:

RF power supply: PLL, VCO, mixer, LNA

Very low noise instrumentation

High speed/high precision data converter

Medical applications: imaging, diagnosis

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.