sales@hkmjd.com
Service Telephone:86-755-83294757
Trade Name:Motor Driver
Brand:NXP
Particular Year:24+
Package:HQFN32
Delivery Date:New and Original
Stock: 14000pcs
The MC33926PNBR2 is a monolithic integrated H-bridge power supply IC designed primarily for automotive electronic throttle control, but can be used for any low-voltage DC servo motor control application within the current and voltage specifications.
Key Features
Continuous operating voltage of 8.0 V to 28 V (transient voltage range of 5.0 V to 40 V)
225 mOhm maximum on-resistance @ 150°C (per H-bridge MOSFET)
3.0 V and 5.0 V TTL / CMOS logic compatible inputs
Overcurrent limiting (regulation) via internal constant off-time PWM
Output short-circuit protection (VPWR short-circuit or ground short-circuit)
Temperature-dependent current limit threshold dropout
All inputs have an internal source/sink to define the default (floating input) state, sleep mode current consumption < 50 µA (inputs floating or set to match default logic state)
Specification
Category: Motor Driver
Package: Tape and Reel (TR) Cut Tape (CT)
Part Status: On Sale
Motor Type - AC, DC: Brushed DC
Function: Driver - Fully Integrated, Control and Power Stage
Output Configuration: Half Bridge (2)
Interface: Parallel
Technology: CMOS
Current - Output: 5A
Voltage - Supply: 5V ~ 28V
Voltage - Load: 5V ~ 28V
Operating Temperature: -40°C ~ 125°C (TA)
Grade: Automotive Grade
Mounting Type: Surface Mount
Package/Housing: 32-PowerQFN
Supplier Device Package: 32-PQFN (8x8)
Base Product Number: MC33926
Applications
Automotive electronics
Active Suspension
Brake and stability control
Motorbike engine control units (ECUs) and small engine controls
Electric pumps
Model
Brand
Package
Quantity
Describe
Maxim
TSSOP-38
3000
65V, 3.8A stepper motor driver with integrated current detection and 128 microstep divider
Maxim
TSSOP-28
3000
36V, 3.8A double H bridge for two brush or single stepper motor drivers
Maxim
TSSOP-28
3000
36V, 3.8A stepper motor driver with integrated current detection and 128 microstep divider
Maxim
TSSOP-28
3000
36V, 3.8A four-way H half-bridge driver with integrated current detection
Maxim
TSSOP-38
3000
65V, 3.8A four-way H half-bridge driver with integrated current detection
A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.
A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.
A: at present, our self-employed brands TI,ST,ADI,NXP,LATTICE,CYPRESS,INFINEON,XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.
A: You can inquire through the website, or by phone and email.
A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.
A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.
NXP Semiconductors was founded in 2006. Its predecessor was the semiconductor business unit of Philips, the Netherlands, which was established in 1953 and headquartered in Eindhoven, the Netherlands. NXP was listed on Nasdaq in 2010.In 2015, NXP acqui…
LPC804M101JHI33
The LPC804M101JHI33 32-bit microcontrollers are low-power, space-saving, low-pin-count 32-bit MCUs based on the 15MHz ARM Cortex-M0+ core. Supports up to 32KB Flash and up to 4KB SRAM.Product AttributesProduct Category: ARM Microcontrollers - MCUs Fam…S9S12XS256J0VAL
The S9S12XS256J0VAL is a high-performance 16-bit microcontroller, based on the S12X core, designed for automotive and industrial applications.LPC4078FBD144
The LPC4078FBD144 is an Arm Cortex-M4 based digital signal controller for embedded applications requiring high integration and low power consumption.S9S08DZ60F2CLF
S9S08DZ60F2CLF is an 8-bit automotive grade microcontroller (MCU) from NXP, belonging to the S08D series, based on the HCS08 core, with a main frequency of 40MHz.LS1020AXN7HNB
LS1020AXN7HNB: 800MHz, QorIQ Layerscape 2-core, 32-bit ARM Cortex-A7 Microprocessor IC, FBGA-525Model: LS1020AXN7HNBPackage: FBGA-525Type: Layerscape ProcessorThe LS1020AXN7HNB QorIQ LS1 family of communications processors, featuring the Layerscape ar…LPC1765FBD100
The LPC1765FBD100 is a Cortex-M3 microcontroller for embedded applications featuring high integration and low power consumption running at 100 MHz.Contact Number:86-755-83294757
Enterprise QQ:1668527835/ 2850151598/ 2850151584/ 2850151585
Business Hours:9:00-18:00
E-mail:sales@hkmjd.com
Company Address:Room1239, Guoli building, Zhenzhong Road, Futian District, Shenzhen, Guangdong
CopyRight ©2022 Copyright belongs to Mingjiada Yue ICP Bei No. 05062024-12
Official QR Code
Links: