Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The TLC6C5716QDAPRQ1 device is an automotive 16-channel constant current RGB LED driver that can be tested on LEDs.The TLC6C5716-Q1 device can provide up to 50mA of output current (set by an external resistor). The device has a 7-bit point calibration with 2 ranges per output. The device also has an 8-bit luminance control for each colour group output.

The brightness of each output can be adjusted with a 12-bit, 10-bit, or 8-bit greyscale control. The device's circuitry is capable of detecting a variety of system faults, including LED faults, shorted neighbouring pins, reference resistor faults, etc. The voltage swing control has 2 selectable outputs. The slew rate control has 2 adjustable positions to minimise system noise. There is a time lag between changes in output level from one LED group to another. The SDI and SDO pins allow multiple devices to be connected in series and controlled through a serial interface.

Features

- Complies with AEC-Q100 for automotive applications with

- Device temperature class 1: -40°C to 125°C, TA

- 16 constant-current trap output channels

- 50mA maximum output current

- 8V maximum output voltage

- Two output banks: OUTRn, OUTBn

- Output Current Adjustment

- 7-bit dot correction (DC) for each channel

- 8-bit Brightness Control (BC) for each bank

- Integrated PWM grey scale generator

- PWM dimmable for each individual channel

- Adjustable global grey scale modes: 12-bit, 10-bit and 8-bit

- Protection and Diagnostics

- Open LED detection (LOD), LED short detection (LSD), output GND short detection (OSD)

- Adjacent Pin Short Circuit (APS) Detection

- Pre-Thermal Warning (PTW), Thermal Shutdown (TSD)

- IREF resistor open circuit (IOF) and short circuit detection (ISF) and protection

- Negative bit switching for GCLK error detection and LOD_LSD register error checking

- LOD_LSD circuit self-test

- Programmable output slew rate

- Output channel group delay

- Serial Data Interface

Applications

- Automotive instrument clusters

- Automotive local dimming displays

- Automotive panels

- Automotive HVAC Control Panels

- Automotive Centre Stack Displays

- Interior RGB Ambient Lighting

- Vehicle Shift and Transmission by Wire

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.