Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The MAX22007 Peripheral Module (MAX22007PMB) provides hardware for evaluating the MAX22007 quad 12-bit configurable analogue outputs.

The module can be used in a variety of ways, but is primarily configured via SPI Analog Devices sells low-cost USB2PMB2# and USB2GPIO# adapter boards that communicate over a USB cable using the Munich GUI software These adapter boards are not included with the MAX22007PMB board. Alternatively, any microcontroller or FPGA with a 12-pin Pmod™ compatible connector can use the SPI connection with Pmod connector J1. Another option for the user is to temporarily connect the system to the pins on connector J1 using wire wrap. For the latter two options, users will need to write their own control software. The board measures 3.5 inches x 0.8 inches (8.69 cm x 2.18 cm).

Features

Easy evaluation of the MAX22007 quad analogue outputs

Two accessible modes:

- Analogue output-voltage mode (0 to +10V)

- Analogue output-current mode (0 to +20mA)

Voltage up to +12.5V Over-range for loads ranging from 1kΩ to 1MΩ over-range

Current up to +24mA for loads ranging from 0 to 500Ω

Automatic load impedance detection

No external power supply required

Generates high voltage power rail power from USB

Works with USB2PMB2# and USB2GPIO# adapters and Munich GUI software

Surge protection up to ±1kV according to IEC 61000-4-5

ESD protection up to ±6kV (contact), ±8kV (air gap) per IEC 61000-4-2 ESD protection up to ±6kV (contact), ±8kV (air gap) per IEC 61000-4-2

Proven design and PCB layout

RoHS compliant

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.