Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The SPC584Cx microcontroller is the first in a new family of devices superseding the SPC564Cx family. SPC584Cx builds on the legacy of the SPC564Cx family, while introducing new features coupled with higher throughput to provide substantial reduction of cost per feature and significant power and performance improvement (MIPS per mW). On the SPC584Cx device, there are two processor cores e200z420 and one e200z0 core embedded in the Hardware Security Module.

All Features

AEC-Q100 qualified

High performance e200z420n3 dual core

32-bit Power Architecture technology CPU

Core frequency as high as 180 MHz

Variable Length Encoding (VLE)

4224 KB (4096 KB code flash + 128 KB data flash) on-chip flash memory: supports read during program and erase operations, and multiple blocks allowing EEPROM emulation

176 KB HSM dedicated flash memory (144 KB code + 32 KB data)

384 KB on-chip general-purpose SRAM (in addition to 128 KB core local data RAM: 64 KB included in each CPU)

Multi-channel direct memory access controller (eDMA) with 64 channels

1 interrupt controller (INTC)

Comprehensive new generation ASIL-B safety concept

ASIL-B of ISO 26262

FCCU for collection and reaction to failure notifications

Memory Error Management Unit (MEMU) for collection and reporting of error events in memories

Cyclic redundancy check (CRC) unit

Crossbar switch architecture for concurrent access to peripherals, Flash, or RAM from multiple bus masters with end-to-end ECC

Body cross triggering unit (BCTU)

Triggers ADC conversions from any eMIOS channel

Triggers ADC conversions from up to 2 dedicated PIT_RTIs

Enhanced modular IO subsystem (eMIOS): up to 64 timed I/O channels with 16-bit counter resolution

Enhanced analog-to-digital converter system with:

3 independent fast 12-bit SAR analog converters

1 supervisor 12-bit SAR analog converter

1 10-bit SAR analog converter with STDBY mode support

Communication interfaces

18 LINFlexD modules

8 deserial serial peripheral interface (DSPI) modules

8 MCAN interfaces with advanced shared memory scheme and ISO CAN-FD support

Dual-channel FlexRay controller

1 ethernet controller 10/100 Mbps, compliant IEEE 802.3-2008

Low power capabilities

Versatile low power modes

Ultra low power standby with RTC

Smart Wake-up Unit for contact monitoring

Fast wakeup schemes

Dual phase-locked loops with stable clock domain for peripherals and FM modulation domain for computational shell

Nexus development interface (NDI) per IEEE-ISTO 5001-2003 standard, with some support for 2010 standard

Boot assist Flash (BAF) supports factory programming using a serial bootload through the asynchronous CAN or LIN/UART

Junction temperature range -40 °C to 150 °C

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.