Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

RH4Z2501BJ3GNM is a line driver / level shifter IC for IO-link communication with integrated protection. It addresses the IO-Link device physical layer for sensors and actuator systems. Furthermore, the IC can also be used as single channel master. For device configuration and status reading, an OWI communication interface is available. The output drivers allow push-pull operation, with a maximum RDSon of less than 2.5Ω for all operational temperatures. The RH4Z2501BJ3GNM is fabricated in a powerful CMOS mixed-signal technology that allows short supply voltage peaks up to 60V.

Feature Of RH4Z2501BJ3GNM

Voltage supply range from 9V to 36V

Over-voltage peak robustness of ±60V

Ambient Temperature range -40°C to 125°C

Configurable driver output current 50mADC to 400mADC

RDSON of less than 2.5Ω

Adjustable driver slew rate

Integrated Wake-up detection

MCU assisted Wake-up generation (typ. 700mA)

OWI digital communication and calibration interface

Integrated Linear Voltage Regulators 3.3V and 5V

Glitch filter for receiver

Integrated protection:

±1.25kV/2.5A (peak) surge protection for L+, CQ, GND/L- (8/20 μs pulse acc. IEC 61000-4- 5)

Reverse polarity protection for L+, CQ, GND/L-

On-chip diagnostics:

Over temperature detection

Supply voltage monitor

Broken chip detection

Applications Of RH4Z2501BJ3GNM

Universal cable driver

IO-Link physical-layer transceiver (PHY)

IO-Link-compliant devices

IO-Link-compliant masters

24V line driver/level shifter

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.