Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The AD4134BCPZ is a four-channel, low-noise, synchronous sampling, precision analogue-to-digital converter (ADC) that delivers outstanding features, performance and ease of use.

The AD4134BCPZ operates over an ambient temperature range of -40°C to 105°C. The device is available in an 8 mm × 8 mm, 56-pin leadframe chip-scale package (LFCSP).

Features

No aliasing: 102.5 dB typical anti-aliasing rejection inherent in high-performance mode

Excellent AC and DC performance

Dynamic range of 108 dB at ODR = 374 kSPS, FIR filter, typical

137 dB dynamic range at ODR = 10 SPS, sinc3 filter, typical

Total harmonic distortion: -120 dB (typical) with 1 kHz input signal tone

Drift of distortion error: 0.9 µV/C (typical)

Gain drift: 2 ppm/°C (typical)

Integral non-linearity: ±FSR of 2 ppm (typical)

Dynamic range enhancement: 4:1 and 2:1 averaging modes

126 dB, weighted dynamic range

Easy synchronisation: asynchronous sample rate converter

Synchronise multiple devices with a single signal line

Programmable data rates range from 0.01 kSPS to 1496 kSPS with 0.01 SPS resolution

Option to control the output data rate via an external signal

Resistive ADC and reference voltage source inputs

Linear phase digital filter options

Low ripple FIR filters: 32µ dB passband ripple up to 161.942 kHz DC

Low-latency sinc3 filters and sinc6 filters up to 391.5 kHz DC

Sinc3 filters for 50 Hz/60 Hz suppression

Crosstalk: 130.7 dBFS

Daisy Chain

CRC error detection for data and SPI interfaces

Two power modes: high-performance mode and low-power mode

Power supplies: 4.5 V to 5.5 V and 1.65 V to 1.95 V

1.8 V IOVDD level

External reference voltage source: 4.096 V or 5 V

Quartz or 48 MHz external CMOS clock

SPI or pin (standalone) configurable operation

Operating temperature range: -40°C to 105°C

Available in 8 mm × 8 mm 56-pin LFCSP package with exposed pads

Applications

Electrical test and measurement

Audio testing

3-phase power quality analysis

Control and hardware cycle verification

Sonar

Condition monitoring for predictive maintenance

Acoustic and material science R&D

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.