Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The LTC3313EV is a very small, low noise, monolithic step-down DC/DC converter capable of delivering up to 15A output current from a 2.25V to 5.5V input supply. The kit uses the Silent Switcher architecture to achieve low EMI and high efficiency at switching frequencies of up to 5MHz. For systems with higher power requirements, multi-phase parallel converters are easily implemented.

The LTC3313EV features a constant frequency, peak current mode control architecture for fast transient response. 500mV reference voltage source for low voltage output. 100% duty cycle operation for low voltage dropout.

Other features include power good signal at output voltage regulation, precision enable threshold, output overvoltage protection, thermal shutdown, temperature monitor, clock synchronisation, mode selection and output short circuit protection. The kit is available in a compact 18-pin 3mm × 3mm LQFN package.

Functional Features

Layout compatible with the LTC3310/LTC3311 family

Quiet switcher® architecture

Ultra-low EMI emission

High efficiency: 3mΩ NMOS and 8mΩ PMOS

Wide bandwidth, fast transient response

Safe against overload inductive saturation

VIN range: 2.25V to 5.5V

VOUT range: 0.5V to VIN

VOUT Accuracy: ±1% remote detection accuracy

Peak current mode control

Minimum turn-on time: 35ns

Programmable frequency to 5MHz

Off current: 1μA

Precision 400 mV enable threshold

Output soft-start and voltage tracking

Power supply normal output

Bare die temperature monitor

Configurable as a parallel power stage

Enhanced thermal performance 3mm × 3mm LQFN package

AEC-Q100 Suitable for automotive applications

Applications

Automotive/Industrial/Communications

Servers, telecom power supplies

Distributed DC power systems (POL)

FPGA, ASIC, μP core power supplies

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.