Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The MAX25612BAUP/V+ is a single-channel high-brightness LED (HB LED) driver suitable for automotive headlamp applications such as high beam, low beam, daytime running light (DRL), turn signal, fog light, and other LED lights. The device drives LED strings from 5V to 48V input voltages with a maximum output voltage of 65V. The MAX25612 is fully synchronous and is ideally suited for boost and step-up/step-down applications requiring synchronous rectification with efficiencies above 90%.

The MAX25612BAUP/V+ detects the output current on the high side of the LED string. The high-side current detection is required to protect the output from shorts to ground or the battery input, and is the most flexible method of driving LEDs, supporting boost, high-side buck, or boost/buck mode configurations. PWM inputs provide LED dimming ratios up to 5000:1, and ICTRL inputs provide the MAX25612 with additional analog dimming capabilities. the MAX25612 also supports FLT fault marking, which can The MAX25612 has built-in spread spectrum modulation for improved EMC performance. The MAX25612BAUP/V+ is available in a space-saving (4mm × 4mm), 20-pin side-mounted, moisture-proof TQFN package or a 20-pin TSSOP package and operates over the -40°C to +125°C automotive-grade temperature range.

Benefits and features

Highly integrated to minimise BOM and cost

Wide input voltage range from +5.0V to +48V with Boost outputs up to +65V

Integrated pMOS dimming FET driver

ICTRL input for analogue dimming

Integrated high-side current detection amplifier

200Hz ramp generator simplifies PWM dimming

Optimised efficiency, board space and input operating range

Synchronous MOSFET drivers increase efficiency by up to 5%, supporting high current boost, boost/buck and high-side buck applications

Programmable switching frequency (200kHz to 2.2MHz)

20-pin TSSOP package with exposed pads; heat enhanced, 4mm x 4mm, 20-pin side moisture-proof TQFN package

Protection features enhance system reliability

Short-circuit, overvoltage and thermal protection

Fault diagnosis through fault identification

Supports automotive applications

-40°C to +125°C operating temperature range

AEC-Q100 certified

Applications

Automotive exterior lighting

Commercial, industrial and architectural lighting

Daytime Running Lights (DRL)

Fog lamps and adaptive headlamp clusters

High beam/low beam/signal/wide-beam

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.