Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The NOIP1SN0300A-QTI is a 1/4" VGA CMOS image sensor with a 640 X 480 pixel array. The high sensitivity 4.8 µm x 4.8 µm pixels support low noise "pipeline" and "trigger" Global shutter readout mode. In addition, correlated double sampling (CDS) support in global shutter mode reduces noise and improves dynamic range. 

The sensor features an on-chip programmable gain amplifier and 10-bit A/D converter. Integration time and gain parameters can be reconfigured without any visible image imperfections. An optional on-chip automatic exposure control loop (AEC) dynamically controls these parameters. The black level of the image can be automatically calibrated or adjusted by adding a user-programmable offset. High programming capability using a four-wire serial peripheral interface allows the user to read out specific areas of interest. Up to 8 areas can be programmed for higher frame rates. The image data interface consists of 4 LVDS channels and achieves a frame rate of up to 815 frames per second in zero ROT mode. Each channel operates at 720 Mbps. A separate synchronisation trench with load information is provided, enabling image reconstruction at the receiver. The PYTHON 300 is available in a 48-pin LCC package in monochrome, colour and enhanced NIR versions with and without protective tape.

Product Attributes

Product Category: Image Sensors

Type: CMOS image sensor

Image size: 640 H x 480 V

Colour readout: Monochrome

Minimum operating temperature: - 40 C

Maximum operating temperature: + 85 C

Resolution: 0.3 Megapixels

Frames per second: 815 fps

Pixel size - width x height: 4.8 um x 4.8 um

Package / Case: LCC-48

Operating supply voltage: 1.8 V, 3.3 V

Humidity Sensitivity: Yes

Optical format: 1.4 in

Series: PYTHON300

Supply Voltage - Max: 3.4 V

Supply Voltage - Min: 1.7 V

Applications

- Machine vision

- Motion monitoring

- Safety

- Barcode scanning (2D)

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.