Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

ADBMS6830B is a multicell battery stack monitor that measures up to 16 series-connected battery cells with a lifetime total measurement error (TME) of less than 2 mV over the full temperature range. 

Features

Measures up to 16 battery cells in series

Maximum lifetime TME: ±1.8 mV at 3.3 V per cell (–40°C to +125°C)

Simultaneous and continuous measurement of cell voltages

Configurable integrated low-pass filtering

Stackable architecture for high voltage battery packs

Built-in isoSPI interface

2 Mbps isolated serial communications

Uses a single twisted pair, up to 20 meters per segment

Low EMI susceptibility and emissions

Bidirectional for broken wire protection

Capacitor or transformer-coupled

Hot plug tolerant without external protection

Passive cell balancing up to 300 mA per channel with programmable PWM

Up to 10 general-purpose analog inputs or digital I/O

Temperature or other sensor inputs

Configurable as an I2C or SPI master

LPCM for cell and temperature monitoring in key-off state

4 μA sleep mode supply current

Provisions for bus bars

Applications

 Electric and hybrid electric vehicles

Backup battery systems

Grid energy storage

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.