Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The L99MOD53XPTR multi-output driver is a microcontroller-driven multi-function actuator driver for automotive applications. Up to three DC motors and three grounded resistive loads can be driven using five half-bridges and three high-side drivers. The integrated SPI controls all operating modes (forward, reverse, brake and high impedance). In addition, all diagnostic information is available via SPI readout.

FEATURES

● AEC-Q100 compliant

● Three half-bridges for 0.75A loads (RDSon = 1600mΩ)

● Two configurable high-side drivers for up to 1.5A loads (RDSon = 500mΩ) or 0.35A loads (RDSon = 1800mΩ)

● One full bridge for 6A loads (RDSon = 150mΩ)

● A high-side driver for 6A loads (RDSon = 100mΩ)

● Driving loads with high inrush currents (i.e., currents > 6A, > 1.5A) with the aid of a programmable soft-start function

● Very low current consumption in standby mode (IS < 6μA (typical); Tj ≤ 85°C)

Applications

● Multi-motor control and other loads with high-side configurations, such as light bulbs/LEDs or power supplies that need to be protected (e.g. sensors or cameras)

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.