Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The device supports automatic connection and speed detection, pull-up/down reflection, and link power management, enabling plug-in USB hubs, hosts, peripherals, and cable isolation.The ISOUSB111DWXR is a USB 2.0-compliant, electrically isolated repeater that supports low-speed (1.5Mbps) and full-speed (12Mbps) signalling rates. The device also supports automatic role swapping. If a new connection is detected on the uplink port after a connection has been disconnected, the uplink and downlink port definitions are swapped. This feature enables the device to support USB On-The-Go (OTG) and Type-C Dual Role Port (DRP) implementations.

Features

● USB 2.0 compliant

● Supports low-speed (1.5 Mbps) and full-speed (12 Mbps) signalling

● Automatic speed and connection detection

● Supports L1 (Sleep) and L2 (Hang) low power states.

● Supports automatic role switching for USB On-the-Go (OTG) and Type C® Dual Role Port (DRP) designs

● High CMTI: 100kV/µs

● VBUS voltage range: 4.25V to 5.5V

● 3.3V internal LDO

● Compliant with CISPR32 Class B radiation limits

Applications

● USB hub, host, peripheral and cable isolation

● Medical

● Factory automation

● Motor drives

● Grid infrastructure

● Power Delivery

● USB Audio

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.