sales@hkmjd.com
Service Telephone:86-755-83294757
Trade Name:AD9649BCPZ-80
Data Manual:AD9649BCPZ-80.pdf
Brand:ADI
Particular Year:23+
Package:LFCSP32
Delivery Date:New and Original
Stock: 1000pcs
The AD9649BCPZ-80 is a single-chip, single-channel, 14-bit, 20/40/65/80 MSPS analogue-to-digital converter (ADC) that is powered by a 1.8 V supply with built-in high-performance sample-and-hold circuitry and an on-chip reference voltage source.
The multi-stage differential pipeline architecture with built-in output error correction logic provides 14-bit precision at 80 MSPS data rate with guaranteed lossless code over the full operating temperature range.
The ADCs have a variety of built-in features that allow for greater flexibility and lower system cost, such as programmable clock and data alignment and generation of programmable digital test codes. Available digital test codes include built-in fixed and pseudo-random codes, as well as user-defined test codes entered via the serial port interface (SPI).
A differential clock input with selectable 1, 2, or 4 division ratios is used to control all internal conversion cycles.
The digital output data format is offset binary, Gray code, or binary complement. A data output clock (DCO) is used to ensure proper latch timing of the receive logic. 1.8 V and 3.3 V CMOS levels are supported.
The AD9649BCPZ-80 is available in a 32-pin LFCSP package, is RoHS compliant, and is rated over the -40°C to +85°C industrial temperature range.
Features
1.8 V analogue power supply supply
1.8 V to 3.3 V output supply
Signal-to-Noise Ratio (SNR):
74.3 dBFS (9.7 MHz input)
71.5 dBFS (200 MHz input)
Spurious-free dynamic range (SFDR):
93 dBc (9.7 MHz input)
80 dBc (200 MHz input)
Low power consumption:
45 mW (20 MSPS)
87 mW (80 MSPS)
Differential input, 700 MHz bandwidth
On-chip reference voltage source and sample-and-hold circuitry
2 V peak-to-peak differential analogue input
Differential non-linearity (DNL): ±0.35 LSB
Serial Port Control Options
Offset binary, Gray code, or binary complement data formats
Applications
Communications
Diversity radio systems
Multi-mode digital receivers
GSM, EDGE, W-CDMA, LTE, CDMA2000, WiMAX, TD-SCDMA
Smart Antenna Systems
Battery Powered Instruments
Handheld Oscilloscopes
Portable Medical Imaging
Ultrasound
Radar/LIDAR
Model
Brand
Package
Quantity
Describe
ADI
QFN-52
5000
8-Channel, 14-Bit Analog to Digital Converter (ADC) with Synchronous Sampling, QFN-52
ADI
LFCSP-32
5000
4-Channel, 4.8kHz, Ultra-Low Noise, 24-Bit Analog-to-Digital Converter (ADC), LFCSP-32
TI
VQFN-32
5000
12-bit Synchronous Sampling Analogue to Digital Converter (ADC), VQFN-32
TI
VQFN-32
5000
Synchronous Sampling 14-bit Analogue to Digital Converter (ADC), VQFN-32
A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.
A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.
A: at present, our self-employed brands TI,ST,ADI,NXP,LATTICE,CYPRESS,INFINEON,XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.
A: You can inquire through the website, or by phone and email.
A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.
A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.
The full name of Analog Devices is Analog Devices, Inc. (ADI). As an outstanding supplier specializing in semiconductor sensors and signal processing ICs, adi regards innovation, performance and excellence as the cultural pillars of the company and ha…
LTC3526LBEDC
LTC3526LBEDC: 550mA, 1MHz, synchronous boost DC/DC converter, DFN-6Overview:The LTC3526LBEDC is a synchronous, fixed-frequency boost DC/DC converter with output disconnect functionality. Synchronous rectification achieves high efficiency in a compact …LT6023IMS8
The LT6023IMS8 is a dual-channel, low-power, precision rail-to-rail output operational amplifier introduced by ADI, packaged in an 8-MSOP (33mm) package.LT6023IDD-1
The LT6023IDD-1 is a dual-channel, low-power, precision rail-to-rail output operational amplifier in a 10-DFN (33mm) package, specifically designed for low-power, high-precision signal conditioning. The chip features a 1.4V/s slew rate, 40kHz gain-ban…LT6023IDD
The LT6023IDD is a dual-channel, ultra-low-power, 1.4V/μs precision rail-to-rail output amplifier.LT6023HMS8
The LT6023HMS8 is a dual-channel, low-power, precision rail-to-rail output operational amplifier in an 8-MSOP (33mm) package, specifically designed for low-power, high-precision signal conditioning.LT6023HDD-1
The LT6023HDD-1 is a dual-channel, low-power, precision rail-to-rail output operational amplifier in a 10-DFN (33mm) package, specifically designed for low-power, high-precision signal conditioning.Contact Number:86-755-83294757
Enterprise QQ:1668527835/ 2850151598/ 2850151584/ 2850151585
Business Hours:9:00-18:00
E-mail:sales@hkmjd.com
Company Address:Room1239, Guoli building, Zhenzhong Road, Futian District, Shenzhen, Guangdong
CopyRight ©2022 Copyright belongs to Mingjiada Yue ICP Bei No. 05062024-12
Official QR Code
Links: