Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The ADGS1412BCPZ is a built-in single-pole single-throw (SPST) switch with four independent switches. The Serial Peripheral interface (SPI) is used to control these switches. The SPI interface has reliable error detection, including cyclic redundancy check (CRC) error detection, invalid read/write address detection, and (SCLK) count error detection.

ADGS1412BCPZ Features:

SPI interface, with error detection function

Contains CRC, invalid read/write addresses, and SCLK count error detection

Supports burst and Daisy chain modes

Compatible with industry standard SPI mode 0 and mode 3 interfaces

On-resistance (25°C) : 1.5Ω (typical value)

On-resistance flatness (25℃) : 0.3Ω (typical value)

On-resistance matching between channels (25℃) : 0.1Ω (typical value)

Rated supply voltage: ±15 V, ±5 V and 12 V

Analog signal range: VSS to VDD

Rated supply voltage: ±15 V, ±5 V and 12 V

1.8V logical compatibility: 2.7V ≤ VL ≤ 3.3V

24-pin LFCSP

Application scenario

The ADGS1412BCPZ is suitable for use in electronic devices requiring high speeds, low on-resistance and a wide supply voltage range. For example, it can be used as a multiplexer, data acquisition system, test equipment, etc.

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.