Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The ADA4097-1BUJZ are single, robust, precision, rail-to-rail input and output operational amplifiers (op amps) with input operating ranges from -VS to +VS and above, with references to tables as Over-The-Top™ in this data sheet. These devices have an offset voltage of <60 μV, an input bias current (IB) of <0.3 nA, and can be operated on a single or split supply from 3 V to 50 V. The ADA4097-1 consumes 32.5 μA of supply current per channel.

The ADA4097-1BUJZ Over-The-Top™ input stage features robust input protection for harsh environments. The inputs can withstand differential voltages up to 80 V without damage or degradation of DC accuracy. The operating common-mode input range extends from rail-to-rail up to 70 V > -VS, independent of the +VS supply.

The ADA4097-1BUJZ is gain-per-unit stable and can drive loads requiring up to 20 mA per channel. These devices can also drive capacitive loads up to 200 pF. These amplifiers feature low power shutdown.

Benefits and Features

Extremely wide common-mode input range: -VS - 0.1 V to -VS + 70 V

Wide supply voltage range: +3 V to +50 V (±25 V supply for PSRR measurement)

Low supply current: 32.5 μA (typical)

Low input offset voltage: ±60 μV (max)

Low input offset voltage drift: ±1 μV/°C (maximum, Class B)

Low input voltage noise

6 Hz typical 1/f noise turn frequency

1000 nV p-p (0.1 Hz to 10 Hz typical)

GBP: 130 kHz (fTEST = 250 Hz, typical)

Swing rate: 0.1 V/μs (ΔVOUT = 4 V, typical)

Low shutdown supply current: 20 μA (max)

Low input offset current: ±300 pA (max)

Large signal voltage gain: 120 dB (ΔVOUT = 3.5 V, min)

Common mode rejection ratio (CMRR): 120 dB (VCM = -0.1 V to +70 V, min)

PSRR: 123 dB (VSY = +3 V to ±25 V, min)

No phase reversal on input overdrive

±2 kV HBM and ±1.25 kV FICDM

Wide operating temperature range: -55°C to +150°C (Class H)

Provides shutdown characteristics for single-channel 6-pin TSOT package

Applications

Industrial sensor conditioning

Power supply current sensing

Battery and power supply monitoring

Front-end amplifiers for harsh environments

4 mA to 20 mA transmitters

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.