Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The LTC2358ILX-16 is a 16-bit, low-noise, 8-channel synchronous sampling successive approximation register (SAR) ADC with buffered differential, wide common-mode range pico-amp inputs. This SoftSpan™ ADC is powered by a low 5V supply and a flexible high voltage supply with an internal reference voltage source and buffer, and each channel can be configured independently based on conversion to accept ±10.24V, 0V to 10.24V, ±5.12V, or 0V to 5.12V signals. Individual channels can also be disabled to increase throughput on the remaining channels.

The LTC2358ILX-16 integrates a pico-amp input analogue buffer, wide input common mode range and 128dB CMRR, enabling the ADC to directly digitise a wide range of signals with minimal board space and power requirements. This input signal flexibility combined with ±1LSB INL, 16-bit lossless coding, and 94.2dB SNR make the LTC2358-16 well suited for many high voltage applications requiring wide dynamic range.

The LTC2358ILX-16 supports pin-selectable SPI CMOS (1.8V to 5V) and LVDS serial interfaces. Data outputs between single and eight channels can be employed in CMOS mode, enabling users to optimise bus width and throughput.

Features

Throughput per channel: 200ksps

Eight buffered synchronous sampling channels

Maximum input leakage current: 400pA/4nA (at 85°C/125°C)

±1LSB INL (maximum, ±10.24V range)

Guaranteed 16-bit, lossless code

Differential, wide common-mode range inputs

SoftSpan input range per channel:

±10.24V, 0V to 10.24V, ±5.12V, 0V to 5.12V

±12.5V, 0V to 12.5V, ±6.25V, 0V to 6.25V

Single conversion SNR: 94.2dB (typical)

-111dB THD (typical, at fIN = 2kHz)

128dB CMRR (typical, at fIN = 200Hz)

Rail-to-rail input overdrive tolerance

Integrated reference voltage source and buffer (4.096V)

SPI CMOS (1.8V to 5V) and LVDS serial I/Os

Internal conversion clock with no cycle delay

Power consumption: 219mW (27mW per channel, typical)

48-pin (7mm × 7mm) LQFP package

Applications

Programmable logic controllers

Industrial process control

Power line monitoring

Test and measurement

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.