Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The LTC2335ILX-16 is a 16-bit, low noise, 8-channel multiplexed successive approximation register (SAR) ADC with differential, wide common mode range inputs. Featuring a 5V low-voltage supply, flexible high-voltage supply, and internal reference and buffer, the SoftSpan™ ADC can be configured in a "conversion-by-conversion" fashion to accept ±10.24V, 0V to 10.24V, ±5.12V, or 0V to 5.12V signals on any channel. signals on any channel. Alternatively, the ADC can be set to cycle through a range of channels and ranges without further user intervention.

The wide input common-mode range and 118dB CMRR of the LTC2335ILX-16's analogue inputs enable the ADC to directly digitise a wide range of signals, simplifying signal link design. This input signal flexibility, combined with ±1LSB INL, lossless code (at 16-bit), and 94.4dB SNR, makes the LTC2335-16 ideally suited for many high-voltage applications requiring wide dynamic range.

The LTC2335ILX-16 supports pin-selectable SPI CMOS (1.8V to 5V) and LVDS serial interfaces.

Features

1Msps throughput rate

±1LSB INL (maximum)

Guaranteed 16-bit, lossless code

Differential, wide common-mode range inputs

8-channel multiplexer with SoftSpan input range:

±10.24V, 0V to 10.24V, ±5.12V, 0V to 5.12V

±12.5V, 0V to 12.5V, ±6.25V, 0V to 6.25V

94.4dB single conversion SNR (typical)

Typical THD of -109dB at fIN = 2kHz

118dB CMRR, 125dB active crosstalk (typical)

Rail-to-rail input overdrive tolerance

Programmable sequencer with no-delay control

Guaranteed operation to 125°C

Integrated reference and buffer (4.096V)

SPI CMOS (1.8V to 5V) and LVDS serial I/O

No pipeline delay, no cycle delay

180mW power dissipation (typical)

48-pin (7mm x 7mm) LQFP package

Applications

Programmable logic controllers

Industrial process control

Power line monitoring

Test and measurement

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.