Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The P9260-BNLG28 is a highly integrated magneto-inductive wireless charging transmitter controller that supports WPC Qi specification or proprietary applications. This device operates with a single coil in full-bridge or half-bridge inverter configurations.

The P9260-BNLG28 features an industry-leading 32-bit Arm® Cortex-M0® processor, offering a high level of programmability and extremely low standby power consumption. The transmitter generates electricity through the power coil, detects the presence of the wireless charging receiver, decodes the communication data packets from the receiver, and adjusts the transmission power by controlling the voltage based on the feedback from the receiver. If a two-way communication protocol can be established, the transmitter will cause the power receiver to output 15W, or for a standard 5W power receiver, the power receiver will only output 5W.

Characteristics

AEC-Q100 complies with the level 2 standard for automotive applications

The EMI/EMC performance complies with the CISPR-25 specification

Supports wireless charging receivers up to 15W

Wide input voltage range: 4.25V to 21V

Fixed-frequency and duty cycle wireless charging topology

Compliant with WPC 1.2.4 standard and will support future WPC compatibility; Support single configuration

Embedded 32-bit Arm Cortex-M0 processor

OTP program memory It also supports external flash memory

Supports I²C and SPI interfaces

Integrated driver for external power FETs and current and voltage detection

Low standby power consumption

Integrated step-down switching regulators for internal modules to enhance overall efficiency

Advanced foreign body detection (FOD) and Q factor function

Support LED for status indication and alignment assistance

Overcurrent, overvoltage and over-temperature protection

Dedicated remote temperature sensor

Typical applications

The P9260-BNLG28 complies with the AEC-Q100 automotive application standard and is suitable for industrial and consumer-grade wireless charging scenarios.

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.