sales@hkmjd.com
Service Telephone:86-755-83294757
Trade Name:Interface Transceivers
Brand:ADI
Particular Year:25+
Package:SOIC-8
Delivery Date:New and Original
Stock: 3000pcs
The LT1796IS8 transceiver has built-in fault tolerance to safely withstand industrial and automotive environments. Discrete protection devices are not required. The bus interface pins are capable of withstanding voltage faults up to ±60V (relative to ground potential) without damage to the device. Faults can occur while the transceiver is running, down, or powered off. The on-chip ESD protection features circuitry that can withstand air discharge up to ±15kV and contact mode discharge testing up to ±8kV, fully compliant with IEC-1000-4-2 specifications. Loss of power or ground connections will not damage the IC.
The circuit can operate at data rates up to 125kbaud. A slew rate control pin controls the transmit data pulse edge to suppress EMI and reflection problems on improperly terminated lines. The high output current drive allows the use of inexpensive PVC cables with impedances as low as 72Ω. 100kΩ input impedance allows up to 256 transceivers per data network.
LT1796IS8 Product Features
Overvoltage line fault protection to ±60V
ESD protection to IEC-1000-4-2 Level 4
±15kV air gap test
±8kV contact mode test
Compatible with ISO 11898 standard
High input impedance supports up to 256 nodes
Controlled slew rate for EMI emission control
Outputs are high impedance when switched off or powered down
Short circuit protection on all outputs
Thermal shutdown protection
Pinout compatible with Philips PCA82C251
LT1796IS8 Product Applications
Industrial control data networks
Automotive systems
HVAC control
Model
Brand
Package
Quantity
Describe
TI
TSSOP-16
4000
3V to 5.5V dual-channel 1Mbps RS-232 line driver/receiver with +/-15kV ESD protection
TI
TSSOP-16
10000
Low-voltage, high-speed, four-channel differential line receiver with +/-15kV IEC ESD
TI
SSOP-16
9000
3V to 5.5V Dual 250kbps RS-232 Line Driver/Receiver with +/-15kV IEC-ESD Protection
TI
DSBGA-12
3000
3.3V LDO digital sensor output driver with integrated surge protection
TI
DSBGA-12
3000
IO-Link device transceiver with low residual voltage and integrated surge protection
A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.
A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.
A: at present, our self-employed brands TI,ST,ADI,NXP,LATTICE,CYPRESS,INFINEON,XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.
A: You can inquire through the website, or by phone and email.
A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.
A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.
The full name of Analog Devices is Analog Devices, Inc. (ADI). As an outstanding supplier specializing in semiconductor sensors and signal processing ICs, adi regards innovation, performance and excellence as the cultural pillars of the company and ha…
ADM706RARZ
The ADM706RARZ is a microprocessor monitoring circuit manufactured by Analog Devices designed for monitoring 3V or 3.3V power supplies.ADUM121N1BRZ
ADUM121N1BRZ is dual-channel digital isolators. Combining high speed, complementary metal-oxide semiconductor (CMOS) and monolithic air core transformer technology, these isolation components provide outstanding performance characteristics superior to…HMC642ALC5
HMC642ALC5: 9 GHz to 12.5 GHz, 6-bit digital phase shifter chip, QFN-32Model: HMC642ALC5 Package: QFN-32 Type: Digital Phase Shifter Overview: The HMC642ALC5 is a 6-bit digital phase shifter chip with a rated frequency range of 9 GHz to 12.5 GHz, …HMC649ALP6E
The HMC649ALP6E is a 6-bit digital phase shifter chip with a rated frequency range of 3 GHz to 6 GHz, providing 360-degree phase coverage with an LSB of 5.625 degrees. The HMC649ALP6E features a low RMS phase error of 3 degrees across all phase states…LT6658AIMSE-5
LT6658AIMSE-5 is a precise, dual-output, high-current, low-noise voltage reference IC. This device uses a Kelvin connection and typically features a load regulation of 0.1ppm/mA and a load current of up to 150mA. The noise reduction pin can be used to…LT6658AIMSE-3.3
LT6658AIMSE-3.3 (Series Voltage Reference) High-Precision, Dual-Output, High-Current, Low-Noise Voltage Reference ICProduct Details: Model: LT6658AIMSE-3.3 Package: MSOP-16 Type: Voltage Reference IC LT6658AIMSE-3.3 Specifications: Product Type: …Contact Number:86-755-83294757
Enterprise QQ:1668527835/ 2850151598/ 2850151584/ 2850151585
Business Hours:9:00-18:00
E-mail:sales@hkmjd.com
Company Address:Room1239, Guoli building, Zhenzhong Road, Futian District, Shenzhen, Guangdong
CopyRight ©2022 Copyright belongs to Mingjiada Yue ICP Bei No. 05062024-12
Official QR Code
Links: