sales@hkmjd.com
Service Telephone:86-755-83294757
Trade Name:High Side Drive
Brand:ST
Particular Year:25+
Package:PowerSSO-16
Delivery Date:New and Original
Stock: 20000pcs
The VN7010AJTR device is a single-channel high voltage side driver, manufactured using ST's proprietary VIPower® M0-7 technology in the PowerSSO-16 package. The device is designed to drive 12 V automotive grounded loads over 3 V and 5 V CMOS compatible interfaces and provides protection and diagnostic functions.
The device incorporates advanced protection features such as load current limiting, active management of overloads through power limiting, and overtemperature shutdown (configurable latching).
The FaultRST pin can unlock the output or disable the latching function in the event of a fault.
Dedicated multi-function multiplexed analogue output pins provide sophisticated diagnostics, including high-precision proportional load current sensing, supply voltage feedback and chip temperature sensing, as well as overload and short-to-ground, short-to-VCC, and off-state open load detection.
The sense enable pin allows the off-state diagnostics to be disabled in the module's low-power mode and external sense resistors to be shared between similar devices.
All Features
Automotive compliant
General Features
Single-channel intelligent high-side driver with MultiSense analogue feedback
Very low standby current
Compatible with 3 V and 5 V CMOS outputs
MultiSense diagnostics
Multiplexed analogue feedback: load current, VCC supply voltage and TCHIP device temperature with high-precision proportional current mirror
Overload and short to ground (power limit) indication
Thermal shutdown indication
Disconnected open load detection
Output short to VCC detection
Sense Enable/Disable
Protection
Undervoltage Shutdown
Overvoltage Clamp
Load Current Limit
Fast thermal transient self-limiting
Configurable latching on over-temperature or power limit with dedicated fault reset pin
Ground and VCC loss
Battery reverse using external components
Electrostatic discharge protection
VN7010AJTR Product Attributes
Number of Exciters: 1 Driver
Number of Outputs: 1 Output
Output Current: 5 A
Supply Voltage - Min: 4 V
Supply Voltage - Max: 28 V
Minimum operating temperature: - 40 C
Maximum operating temperature: + 150 C
Operating supply current: 3 mA
Output voltage: 5 V
Model
Brand
Package
Quantity
Describe
ST
PowerSSO-24
26000
Dual-channel high-side driver supporting analogue current sensing for automotive applications
A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.
A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.
A: at present, our self-employed brands TI,ST,ADI,NXP,LATTICE,CYPRESS,INFINEON,XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.
A: You can inquire through the website, or by phone and email.
A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.
A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.
The STMicroelectronics (ST) Group was established in 1987 by the merger of Italys SGS Microelectronics and Frances Thomson Semiconductor. In May 1998, SGS-THOMSON Microelectronics changed the company name to STMicroelectronics Limited. STMicroelectron…
STM32C091KCU6
The STM32C091KCU6 is a 32-bit microcontroller (MCU) based on the ARM Cortex-M0+ core, which is mainly used for embedded system designs requiring high performance and low power consumption . Its performance parameters and applications are as follows:…STM32C091KCT6
The STM32C091KCT6 is a 32-bit microcontroller (MCU) based on an ARM Cortex-M0+ core that operates at 48MHz with 256KB of flash memory and 36KB of RAM. Its technical specifications and applications are as follows:Technical SpecificationCore process…STM32C091CCU6
The STM32C091CCU6 microcontroller is a device based on the high performance ARM Cortex-M0 32-bit RISC core operating up to 48 MHz. It is equipped with high-speed embedded memory, including up to 256K bytes of flash memory and 36K bytes of SRAM. Its…STM32C091CCT6
The STM32C091CCT6 is a 32-bit microcontroller based on the ARM Cortex-M0 core, with a main frequency of up to 48 MHz, featuring high performance and low power consumption . This chip adopts LQFP48 packaging, is compact in size and suitable for a var…STM32C091RCT6
The mainstream microcontroller STM32C091RCT6 is based on a high-performance Arm Cortex-M0+ 32-bit RISC core with an operating frequency of up to 48 MHz. This MCU combines a memory protection unit (MPU), high-speed embedded memory (up to 36 KB of SRAM …STM32C091RCI6
The STM32C091RCI6 is a microcontroller based on Arm Cortex-M0+ 32-bit RISC core, which can operate at a frequency of up to 48 MHz. It is highly integrated for a wide range of applications in consumer, industrial and home appliance, and is ready for …Contact Number:86-755-83294757
Enterprise QQ:1668527835/ 2850151598/ 2850151584/ 2850151585
Business Hours:9:00-18:00
E-mail:sales@hkmjd.com
Company Address:Room1239, Guoli building, Zhenzhong Road, Futian District, Shenzhen, Guangdong
CopyRight ©2022 Copyright belongs to Mingjiada Yue ICP Bei No. 05062024-12
Official QR Code
Links: