Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The DP83TC812-Q1 device is an IEEE 802.3bw-compliant automotive PHYTER™ Ethernet physical layer transceiver that can be used with unscreened twisted pair cables.The PHY supports TC10 sleep and wake functions. It provides all the physical layer functionality required to send and receive data over a single shielded twisted pair cable. The PHY also incorporates a low-pass filter on the MDI side to reduce emissions.

Features

- Compliant with Open Alliance and IEEE 802.3bw 100BASE-T1 standards

- Meets Class IV emission standards with integrated LPF

- TC-10 compliant and sleep current < 20μA

- SAE J2962-3 EMC-compliant

- Configurable I/O voltages: 3.3V, 2.5V and 1.8V

- MAC interface: MII, RMII, RGMII and SGMII

- MAC interface pin selectable independent voltage rails (3.3V, 2.5V, 1.8V)

- Compliant with AEC-Q100 standard for automotive applications.

- Temperature class 1: -40 °C to +125 °C operating ambient temperature range

- ±8 kV HBM ESD for pins 12 and 13

- IEC61000-4-2 ESD classification class 4 for pins 12 and 13: ±8 kV contact discharge

- Supports IEEE 1588 SFD

- TSN-compliant, 802.3br frame grabbing support

- Low active power operation: < 230mW

- Diagnostic tool kit

- Signal Quality Indicator (SQI)

- Time Domain Reflection (TDR)

- Electrostatic discharge sensor

- Voltage sensor

- PRBS Built-in Self Test

- Loopback

- VQFN, wet-side mountable package

- Functionally safe versions available

- Documentation available to assist with functional safety system design

Applications

- ADAS

- Gateway and body control

- Telematics

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.