Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The TMS320LF2401AVFAR device is part of the fixed-point TMS320C24x™ platform. The device offers an enhanced TMS320™ DSP architecture design with a C2xx core CPU with low cost, low power and high performance processing capabilities.

Product: TMS320LF2401AVFAR

Core: C24x

Clock frequency: 40MHz

Package: LQFP-32

Operating temperature: -40°C ~ 85°C

Features:

High performance static CMOS technology

25ns instruction cycle time (40 MHz)

40-MIPS performance

Low power 3.3 design

CPU core based on TMS320C2xx DSP

Compatible with 240x and F243/F241/C242 codes

Instruction set compatible with F240

On-chip memory

Up to 8K words x 16-bit Flash EEPROM (2 sectors)(LF2401A)

8K word x 16-bit ROM (LC2401A)

Programmable "code safe" features of on-chip Flash/ROM

Up to 1K words x 16-bit data/program ram

544-word dual access RAM

Up to 512 words of single access RAM

Boot rom

SCI bootstrap

Event Manager (EV) module (EVA), including:

Two 16-bit universal timers

Seven 16-bit pulse width modulation (PWM) channels support:

Three-phase inverter control

Center alignment or edge alignment of the PWM channel

Use the external PDPINTA pin to turn off the PWM channel in an emergency

Programmable dead zone (dead zone time) prevents straight-through failures

A capture unit for timestamp of external events

Select the input qualifier for the pin

Synchronous analog-to-digital conversion

Designed for AC induction, BLDC, switched reluctance and stepper motor control

The small size (7 mm x 7 mm) is ideal for space-constrained applications

Watchdog (WD) timer module

10-bit analog-to-Digital Converter (ADC)

5 multiplexed input channels

Minimum conversion time 500 ns

Optional dual 8-state timing controller triggered by the event manager

Serial communication interface

Clock generation based on phase locked loop (PLL)

Up to 13 individually programmable, multiplexed universal input/Output (GPIO) pins

User optional dual external interrupts (XINT1 and XINT2)

Power Management:

Three power saving modes

Can turn off each peripheral independently

Scanning based Real-time simulation according to the JTAG standard, IEEE Standard 1149.1 (JTAG)

Development tools include:

Texas Instruments (TI) ANSI C compiler, assembler/linker and Code Composer Studio debugger

Evaluation module

Scanning-based Self-simulation (XDS510)

Extensive third-party digital motor control support

32 Pin VF Thin Square Flat Package (LQFP)

Extended temperature options (A and S)

A: –40°C to 85°C

S: –40°C to 125°C

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.