Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The ZL30934ALDG1 synchronizer has up to seven individual DPLLS and five very low output jitter frequency synthesizers, combined with IEEE 1588-2008 precision time protocol stack and synchronization algorithm software modules. This product is ideal for 5G small cellular applications requiring compliance with SyncE and IEEE1588/PTP standards.

Features:

Highlights

Combined with IEEE 1588-2008 Precision Time Protocol Stack and Synchronization Algorithm software modules

Ultra Precise Timing for 5G Radio Access Networks

Four independent DPLL clock channels plus three additional DPLLs for NCO Hybrid, Split XO and redundant oscillator modes

Five output synthesizers

Any-to-any frequency conversion per channel

Inputs: up to 10, differential or single-ended

Outputs: up to 10 differential, up to 20 CMOS

Output jitter 100 fs RMS typical for 156.25 MHz 12 kHz to 20 MHz

Core power consumption <0.9W

Packet and/or physical-layer frequency, phase and time synchronization

Physical-layer compliance with ITU-T G.8262, G.8262.1, G.813, G.812, Telcordia GR-1244, GR-253

Packet-timing compliance with ITU-T G.8261, G.8263, G.8273.2 (class A,B,C,D), G.8273.4

Enables 5G wireless applications with sub-100 ns time/phase alignment requirements

Hitless reference switching

General Features

Automatic self-configuration at power-up from internal Flash memory, 7 configurations

Input-to-output alignment <100 ps

Numerically controlled oscillator behavior in each DPLL and each synthesizer

Easy-to-configure design requires no external VCXO or loop filter components

5 GPIO pins with many possible behaviors, each REF can be GPI, each OUT can be GPO

SPI or I2C processor Interface

1.8V and 3.3V core VDD voltages

Easy-to-use evaluation/programming software

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.