Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The ISM330BXTR Inertial Measurement Unit (IMU) features a 3-axis digital accelerometer and a 3-axis digital gyroscope with three channels. These channels are used to process acceleration and angular velocity data for motion tracking and vibration measurement, as well as Qvar detection on up to three separate channels with dedicated configuration, processing and filtering capabilities.

Features

Triaxial accelerometer, full scale optional ±2/±4/±8g

Three-axis gyroscope with extended optional full scale of ±125/±250/±500/±1000/±2000/±4000dps

Triaxial accelerometer with flat, wide-band (2kHz) frequency response and low noise (70μg/√ Hz on SPI/I3C interface and even down to 30μg/√ Hz on TDM interface)

Power consumption as low as 0.6mA in high performance mode (in combination mode) or only 0.19mA accelerometers

SPI/I2C and MIPI I3C® v1.1 serial interface with main processor data synchronization

TDM Controller interface

Programmable finite state machine for accelerometer, gyroscope and analog hub /Qvar sensor data processing at rates up to 960Hz

Embedded sensor fusion Low Power Consumption (SFLP) algorithm

Machine learning kernel with scalable features and filters for AI applications

Embedded Adaptive Self-Configuration (ASC)

Smart FIFO up to 4.5 KB

Embedded analog hub for analog-to-digital conversion and processing of analog input data

Embedded Qvar: Charge change detection

Embedded temperature sensor

Analog supply voltage range: 1.71V to 3.6V

Independent IO power supply (extended range 1.08V to 3.6V)

Compact size: 3mm x 2.5mm x 0.71mm

Comply with ECOPACK and RoHS directives

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.