Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

A6983IQTR is a device specifically designed for isolated buck topology. The primary output voltage can be accurately adjusted, whereas the isolated secondary output is derived by using a given transformer ratio. 

Features

AEC-Q100 qualified

Operating temperature range: -40 °C to +150 °C for Tj

Designed for iso-buck topology

3.5 V to 38 V operating input voltage

Load dump tolerant up to 40 V

Primary output voltage regulation, no optocoupler required

4.5 A source/sink peak primary current capability

Peak current mode architecture in forced PWM operation

390 ns blanking time

25 μA operating quiescent current

200 kHz to 1 MHz programmable switching frequency, stable with low ESRcapacitor: min 2 µF

Internal compensation network

2 μA shutdown current

Internal soft-start

Enable pin

Overvoltage protection

Output voltage sequencing

Thermal protection

Optional spread spectrum for improved EMC

Power Good

Synchronization to external clock

Applications

Automotive isolated IGBT/SiC MOSFET gate drive supply

OBC (on-board charger) for HEV/EV

Electric traction systems

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.