Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The DS90UB954TRGZRQ1 is a versatile dual deserialiser hub that can receive serial sensor data from one or two independent sources via the FPD-Link III interface. When used in conjunction with the DS90UB953-Q1 serialiser, the DS90UB954-Q1 receives data from imagers supporting 2MP/60fps and 4MP/30fps cameras as well as satellite radar and other sensors such as ToF and LiDAR. The received data is aggregated to an output that is MIPI CSI-2 compliant and interfaced with a downstream processor.

Features

- Compliant with AEC-Q100 standard for automotive applications

- Device temperature class 2: -40°C to +105°C ambient operating temperature range

- Dual deserialiser hubs can be aggregated via the FPD-Link III interface

One or two active sensors

- Power over Coax (PoC) compatible transceivers

- MIPI DPHY version 1.2/CSI-2 version 1.3 compliant

- CSI-2 output port

- Supports 1, 2, 3, 4 data channels

- CSI-2 data rate scalable: 400Mbps/800Mbps/1.5Gbps/1.6Gbps per data channel

- Programmable data types

- Four virtual channels

- ECC and CRC generation

- 2x2 output copy mode

- Ultra-low data and control path latency

- Single-ended coaxial or shielded twisted pair (STP) cable support

- Adaptive receive equalisation

- I2C with fast mode enhancement (up to 1Mbps)

- Flexible GPIO for camera synchronisation and diagnostics

- Compatible with DS90UB935-Q1, DS90UB953-Q1, DS90UB933-Q1 and DS90UB913A-Q1 serializers

- Line fault detection and advanced diagnostics

- Compliant with ISO 10605 and IEC 61000-4-2 ESD standards

 Applications

- Automotive ADAS

- Rear View Camera (RVC)

- Surround View Systems (SVS)

- Camera monitoring systems (CMS)

- Front View Camera (FC)

- Driver Monitoring Systems (DMS)

- Satellite Radar, Time of Flight (ToF) and Lidar Sensor Modules Blocks

- Security and Surveillance

- Industrial and medical imaging

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.