Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

ISO5852SQDWRQ1 is a 5.7kVRMS, reinforced isolated gate driver for IGBTs and MOSFETs with split outputs, OUTH and OUTL, providing 2.5A source and 5A sink current. The input side operates from a single 2.25V to 5.5V supply. The output side allows for a supply range from minimum 15 V to maximum 30 V.

Product Features

100kV/μs Minimum Common-Mode Transient Immunity (CMTI) at VCM = 1500 V

Split Outputs to Provide 2.5A Peak Source and 5A Peak Sink Currents

Short Propagation Delay: 76 ns (Typ), 110 ns (Max)

2A Active Miller Clamp

Output Short-Circuit Clamp

Soft Turn-Off (STO) during Short Circuit

Fault Alarm upon Desaturation Detection is Signaled on FLT and Reset Through RST

Input and Output Undervoltage Lockout (UVLO) with Ready (RDY) Pin Indication

Active Output Pulldown and Default Low Outputs with Low Supply or Floating Inputs

2.25V to 5.5V Input Supply Voltage

15V to 30V Output Driver Supply Voltage

CMOS Compatible Inputs

Rejects Input Pulses and Noise Transients Shorter Than 20 ns

Isolation Surge Withstand Voltage 12800-VPK

Applications

Isolated IGBT and MOSFET Drives in:

– HEV and EV Power Modules

– Industrial Motor Control Drives

– Industrial Power Supplies

– Solar Inverters

– Induction Heating

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.