Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The ADIN1110CCPZ is an ultra-low-power, single-port 10BASE-T1L transceiver for industrial Ethernet applications that complies with the IEEE® 802.3cg-2019™ Ethernet standard to support long-haul 10 Mb/s single-pair Ethernet (SPE) applications.The ADIN1110CCPZ has an integrated Media Access Control (MAC) interface that allows direct connection to various host controllers via a 4 The ADIN1110CCPZ has an integrated Media Access Control (MAC) interface that directly connects to a variety of host controllers via a 4-wire Serial Peripheral Interface (SPI). The SPI can be used with a low-power processor, eliminating the need for an integrated MAC and resulting in very low overall system-level power consumption.The SPI can be configured to use either the OPEN Alliance SPI protocol or the Universal SPI protocol.

Features

Compliant with 10BASE-T1L IEEE 802.3cg-2019 standard requirements

Cable extension range up to 1700 m with 1.0 V/2.4 V support

MAC with integrated SPI

Supports OPEN Alliance 10BASE-T1x MAC-PHY serial interface

16 MAC address filters

High and low priority queues with 28 kB buffers

Straight-through or store-and-forward operation

IEEE 1588 timestamp support

Statistical counter

Low power consumption: 42 mW (dual supply, 1.0 V p-p)

Diagnostics

Cable fault detection with TDR

Link quality indicator with MSE

Frame generator and checker

Multiple loopback modes

IEEE test pattern support

Supports 1.0 V p-p and 2.4 V p-p transmit levels

4-pin MDI (RXN, RXP, TXN and TXP)

Suitable for intrinsically safe applications

External termination resistor

Auto-negotiation

25 MHz crystal or external clock input

Electromagnetic compatibility (EMC) test standards

IEC 61000-4-4 Electrical fast transients (±4 kV)

IEC 61000-4-2 ESD (±4 kV contact discharge)

IEC 61000-4-2 ESD (±8 kV air discharge)

IEC 61000-4-6 Conducted immunity (10 V/m)

IEC 61000-4-5 Surge (±4 kV)

IEC 61000-4-3 Radiated immunity (Class A)

EN 55032 radiated emission (Class B)

Small package: 40-pin (6 mm × 6 mm) LFCSP package

Temperature range

Industrial: -40°C to +85°C

Extended range: -40°C to +105°C

Applications

Field instrumentation

Building automation and fire safety

Factory automation

Edge sensors and actuators

Condition monitoring and machine connectivity

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.