Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The BQ756506PAPRQ1 device provides highly accurate cell voltage measurements up to 6S battery modules in less than 200µs and also supports shunt resistor current sense measurements.

Features

Automotive compliant

The following features are compliant with the AEC-Q100 standard:

Device Temperature Class 1: -40°C to +125°C ambient operating temperature range

Device HBM ESD Classification 2

Device CDM ESD Classification Level C4B

Functional Safety Compliant

Developed for functional safety applications

Documentation to aid in ISO 26262 system design

System meets ASIL D requirements

Hardware meets ASIL D requirements

±1.5mV ADC accuracy

Pin/package and software compatible device families:

Stackable Monitors 16S (BQ79616-Q1, BQ79656-Q1), 14S (BQ79614-Q1, BQ79654-Q1) and 12S (BQ79612-Q1, BQ79652-Q1)

Stand-alone monitor 48V system (BQ75614-Q1)

Supports current detection measurements

Supports fuse and relay open and close diagnostics

Built-in redundant paths for voltage, temperature, and current diagnostics

Performs highly accurate battery voltage measurements on all battery channels within 128µs

Integrated post ADC configurable digital low-pass filter

Host-controlled, built-in hardware reset that emulates a POR-like device reset

Supports internal cell balancing

240mA balance current

Built-in balancing thermal management with automatic pause and resume control

5V LDO output to power external digital isolators

UART host interface

Built-in SPI controller

Applications

Automotive 12V lithium-ion battery systems

Electric bicycles, electric scooters

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.