sales@hkmjd.com
Service Telephone:86-755-83294757
Trade Name:ADXL1004BCPZ
Data Manual:ADXL1004BCPZ.pdf
Brand:ADI
Particular Year:23+
Package:LFCSP-32
Delivery Date:New and Original
Stock: 1000pcs
The ADXL1004BCPZ offers ultra-low noise density over an extended frequency range and is optimised for bearing fault detection and diagnostics.The ADXL1004 has a noise density of 125 μg/√Hz (typical) over the entire linear frequency range. The microelectromechanical systems (MEMS) accelerometer has stable, repeatable sensitivity and can withstand external shocks of up to 10,000 g. The ADXL1004 has an integrated signal conditioning electronics that enables a stable, repeatable sensitivity and is optimised for bearing fault detection and diagnosis.
Integrated signal conditioning electronics enable features such as full static self-test (ST) and over-range (OR) indicators for embedded applications. The ADXL1004 also enables wireless sensing product designs with its low power consumption and single supply from 3.3 V to 5.25 V. The ADXL1004BCPZ is available in a 5 mm × 5 mm × 1.80 mm LFCSP package and operates over the -40°C to +125°C temperature range.
Features
Single-plane-axis accelerometer with analogue output
Full-scale range: ±500 g
Linear frequency response range: DC to 24 kHz typical (3 dB point)
Resonant frequency: 45 kHz (typical)
Ultra-low noise density: 125 μg/√Hz
Over-range sensing and DC coupling for fast recovery times
Comprehensive electromechanical self-test
Sensitivity performance
Temperature sensitivity stability within 5 per cent
Linearity ±0.25% of full scale range
Cross-axis sensitivity: ±1.5% (Z-axis acceleration effect on X-axis; Y-axis acceleration effect on X-axis)
Single power supply
Output voltage proportional to power supply
Low power consumption: 1.0 mA (typical)
Power-saving standby mode of operation for fast recovery
RoHS compliant
Operating temperature range of -40°C to +125°C
32-pin 5 mm × 5 mm × 1.80 mm LFCSP package
Applications
Condition monitoring
Predictive maintenance
Asset health
Test and measurement
Health and Utilisation Monitoring Systems (HUMS)
Acoustic Emissions
Model
Brand
Package
Quantity
Describe
ADI
LGA-16
3000
Versatile 3-Axis, Digital Output, Ultra-Low Power Digital Accelerometer, LGA-16
ADI
LCC
15000
Single-axis ±70 g accelerometer with integrated dual-spectrum acceleration detection
ADI
LGA-14
50000
Accelerometer X, Y, Z Axis ±2g, 4g, 8g, 16g 0.05Hz ~ 1.6kHz 14-LGA (3x5)
ADI
LGA-14
3000
Low noise, low power consumption, wide bandwidth, 3-axis MEMS accelerometer
ADI
LGA-14
3000
Low noise, low power consumption, wide bandwidth, 3-axis MEMS accelerometer
ADI
LGA-14
3000
Low noise, low power consumption, wide bandwidth, 3-axis MEMS accelerometer
ADI
LGA-14
3000
Low noise, low power consumption, wide bandwidth, 3-axis MEMS accelerometer
A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.
A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.
A: at present, our self-employed brands TI,ST,ADI,NXP,LATTICE,CYPRESS,INFINEON,XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.
A: You can inquire through the website, or by phone and email.
A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.
A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.
The full name of Analog Devices is Analog Devices, Inc. (ADI). As an outstanding supplier specializing in semiconductor sensors and signal processing ICs, adi regards innovation, performance and excellence as the cultural pillars of the company and ha…
LT6658AHDE-1.2
The LT6658AHDE-1.2 is a precision dual-output reference voltage source device that combines the performance of a precision reference voltage source with that of a linear regulator (which we call a Refulator™). Even with heavy loads, the two outputs a…ADR1399KEZ
The ADR1399KEZ precision shunt reference offers excellent temperature stability across a wide range of voltage, temperature, and quiescent current conditions.ADR1000AHZ
The ADR1000AHZ is a 6.62 V, highly stable output, oven-controlled, embedded Zener reference component built on ADIs proprietary bipolar process, and is a pin-compatible replacement for the LTZ1000.LTC6602IUF
The LTC6602IUF is housed in a 24-pin QFN-EP (4mm 4mm) package and is an integrated chip combining a matched high-frequency bandpass/low-pass filter with a differential driver, specifically designed for applications requiring precise filtering and sig…LTC6602CUF
The LTC6602CUF is a dual-channel, matched, programmable bandpass or lowpass filter and differential driver.LT6604CUFF-2.5
The LT6604CUFF-2.5 device incorporates two matched fully differential amplifiers, each with a fourth-order, 2.5MHz low-pass filter.Contact Number:86-755-83294757
Enterprise QQ:1668527835/ 2850151598/ 2850151584/ 2850151585
Business Hours:9:00-18:00
E-mail:sales@hkmjd.com
Company Address:Room1239, Guoli building, Zhenzhong Road, Futian District, Shenzhen, Guangdong
CopyRight ©2022 Copyright belongs to Mingjiada Yue ICP Bei No. 05062024-12
Official QR Code
Links: