sales@hkmjd.com
Service Telephone:86-755-83294757
Trade Name:TPS63020DSJR
Data Manual:TPS63020.pdf
Brand:TI
Particular Year:21+
Package:VSON14
Delivery Date:New and Original
Stock: 20000pcs
The TPS6302x devices provide power solutions for products powered by two- or three-cell alkaline, NiCd or NiMH, one-cell Li-Ion or Li-polymer, supercapacitors, or other power rails. Supports output current up to 3 A. When batteries are used, their discharge voltage can drop below 2 V. Buck-boost converters are based on fixed frequency, pulse width modulation (PWM) controllers that use synchronous rectification for maximum efficiency. At low load currents, the converter enters a power saving mode to maintain high efficiency over a wide load current range. Power save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switch is limited to 4 A typical. The output voltage can be programmed using an external resistor divider, or fixed inside the chip. The converter can be disabled to minimize battery consumption. During shutdown, the load is disconnected from the battery.
The TPS6302x devices operate over a free air temperature range of –40°C to 85°C. The devices are available in a 14-pin VSON package measuring 3 mm × 4 mm (DSJ).
Features of the TPS63020
Input voltage range: 1.8 V to 5.5 V
Adjustable Output Voltage: 1.2 V to 5.5 V
Output current at V IN > 2.5 V, V OUT = 3.3 V: 2 A
High efficiency over the entire load range
Operating Quiescent Current: 25 µA
Power saving mode with mode selection
Average Current Mode Buck-Boost Architecture
Automatic transition between modes
Runs at a fixed frequency of 2.4 MHz
can be synchronized
Power good output
Safe and powerful operating features
Over temperature and over voltage protection
Load disconnection during shutdown
Model
Brand
Package
Quantity
Describe
TI
QFN-29
2000
Automotive High-Efficiency Buck Converters Optimized for High Power Density
TI
QFN-29
2000
Automotive High-Efficiency Buck Converters Optimized for High Power Density
TI
QFN-29
2000
Automotive High-Efficiency Buck Converters Optimized for High Power Density
Maxim
TQFN
1000
Switching Regulator 3V to 80V, High Efficiency, Synchronous Step-Down DC-DC Converter
TI
12-WSON
2000
Buck Switching Regulator IC Positive Adjustable 0.8V 1 Output 5A 12-WFDFN
TI
12-WSON
2000
Buck Switching Regulator IC Positive Adjustable 0.8V 1 Output 4A 12-WFDFN
TI
SOT-23-6
2000
Buck Switching Regulator IC Positive Adjustable 0.6V 1 Output 3A SOT-23-6 Thin, TSOT-23-6
TI
VQFN-9
2000
Buck Switching Regulator IC Positive Adjustable (Fixed) 1V (5V) 1 Output 2A 9-VFQFN
A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.
A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.
A: at present, our self-employed brands TI,ST,ADI,NXP,LATTICE,CYPRESS,INFINEON,XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.
A: You can inquire through the website, or by phone and email.
A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.
A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.
Texas Instruments (TI), abbreviated as TI, is the worlds leading semiconductor company providing innovative digital signal processing (DSP) and analog device technologies for real-world signal processing. In addition to the semiconductor business, it …
DP83TC811SWRNDRQ1
The DP83TC811SWRNDRQ1 Low Power Automotive PHYTER 100BASE-T1 Ethernet Physical Layer Transceiver provides the physical layer functionality required for transmitting and receiving data over shielded single twisted pair cable. The device enables xMII fl…PCM1862QDBTRQ1
The PCM186x-Q1 family of audio front-end devices (PCM1862QDBTRQ1) takes a new approach to audio feature integration to simplify compliance with European eco-design regulations while enabling high-performance end-products at a lower cost.TPS2065CDBVR
The TPS2065CDBVR distribution switch products are used in applications such as USB where high capacitive loads and short circuits are likely to be encountered.LM5168FDDAR
The LM5168FDDAR synchronous buck converter is designed to regulate over a wide input voltage range to minimise the need for external surge suppression components.SN75C1168NSR
The SN75C1168NSR dual drivers and receivers are integrated circuits designed for balanced transmission lines.BQ77PL900DLR
The BQ77PL900DLR is a five to ten cell series-connected lithium-ion battery pack protector.Contact Number:86-755-83294757
Enterprise QQ:1668527835/ 2850151598/ 2850151584/ 2850151585
Business Hours:9:00-18:00
E-mail:sales@hkmjd.com
Company Address:Room1239, Guoli building, Zhenzhong Road, Futian District, Shenzhen, Guangdong
CopyRight ©2022 Copyright belongs to Mingjiada Yue ICP Bei No. 05062024-12
Official QR Code
Links: