Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The NCN26000XMNTXG Ethernet chip is an Ethernet transceiver (PHY) that complies with IEEE 802.3cg standards and is designed for industrial multi-point Ethernet. The NCN26000XMNTXG offers all the physical layer characteristics required for transmitting and receiving data over a single unshielded twisted pair. The NCN26000XMNTXG is transmitted to the existing half-duplex 10Mb/s functional Ethernet MAC controller via the standard MII interface.

Key features

Complies with the 10BASE-T1S-IEEE 802.3cg standard

A data rate of 10Mb/s, half-duplex

3.3V power supply

5mm x 5mm QFN32 package

The Standard Medium Independent Interface (MII) is connected to any MAC that supports CSMA/CD half-duplex (with exposed CRS and COL pins).

Achieve conflict-free operations on shared media (multi-point) through local configuration to avoid physical layer conflicts (PLCA)

Configure and monitor using the standard MII management interface (also known as MDIO)

When the equipment starts up, the pull resistor on the dedicated pin is used for local configuration in the start-up sequence

Enhanced anti-noise mode, allowing communication to be conducted at noise levels exceeding the IEEE 802.3cg specification

Support more than 8 nodes via >25m UTP cable

Fast startup: Less than 100ms

Support bootstrap in isolation mode

Application field

Industrial automation

Sensor interface

Home/Building control

Safety and field instrumentation

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.