Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

F6103NTGK is an 8-channel receiver IC designed using a SiGe BiCMOS process for CDL phased array applications. The core IC has 6-bit phase control coupled with 30dB gain control on each channel to achieve fine beam steering and gain compensation between radiating channels. The device has 17dB nominal electric gain and -31dBm IP1dB. The core chip achieves an RMS phase error of 3° and RMS gain error of 0.3dB over the frequency of operation. The typical total power consumption is 0.32W (40mW per channel).

Features Of F6103NTGK

14GHz to 16GHz operation

8 radiation channels

6-bit phase control

20ns typical gain settling time

20ns typical phase settling time

3° typical RMS phase error

0.3dB typical RMS gain error

30dB gain attenuation range

5-bit IC address

Integrated proportional-to-absolute temperature (PTAT) sensor with external biasing

-40°C to +95°C internal temperature sensor

Programmable 4-state on-chip memory

Supply voltage: +2.1V to +2.5V

-40°C to +95°C ambient operating temperature range

27°C typical ambient operating temperature

5mm x 5mm, 40-QFN package

Competitive Advantage Of F6103NTGK

High integration

Orthogonality of phase and amplitude control .

Advanced Serial Peripheral Interface (SPI) with 4-state memory

Superior channel-to-channel isolation

Minimal footprint

Applications Of F6103NTGK

CDLTerminals

Aerospace and Maritime

Beam Steering

Point-to- Point (Line-of-Sight) Communications

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.