Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The STM32H753ZIT6 high-performance MCU is based on the high-performance Arm® Cortex®-M7 32-bit RISC core and operates at up to 400 MHz.The Cortex-M7 core features floating-point unit (FPU) precision and supports Arm double-precision (IEEE 754-compliant) and single-precision data processing instructions and data types.STM32H7 MCU supports a full set of DSP instructions and a memory protection unit (MPU) for enhanced application security.

Features

Core

32-bit Arm® Cortex®-M7 core with double-precision FPU and L1 cache: 16KB data and 16KB instruction cache.

Supports single access to one cache line from 256-bit embedded flash; up to 400 MHz, MPU, 856 DMIPS/2.14 DMIPS/MHz (Dhrystone 2.1) and DSP instructions

Memory

Up to 2Mbyte Flash with simultaneous read/write capability

1MB of RAM: 192KB of TCM RAM (including 64KB of ITCM RAM + 128KB of DTCM RAM for storing time-sensitive critical programs or data), 864KB of user SRAM, and 4KB of backup domain SRAM

Dual-mode Quad-SPI memory interface running at up to 133MHz

Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, NOR/NAND Flash clocked at up to 133MHz in synchronous mode

CRC calculation unit

Security

ROP, PC-ROP, active tampering

General purpose inputs/outputs

Up to 168 I/O ports with interrupt capability

Fast I/O running at up to 133 MHz

Up to 164 5V tolerant I/Os

Reset and power management

3 independent power domains that can be independently clocked gated or switched off to maximise power efficiency:.

D1: High performance peripherals enabling high bandwidth

D2: Communication peripherals and timers

D3: Reset/clock control/power management

1.62V to 3.6V application power and I/O

POR, PDR, PVD and BOR

Dedicated USB power supply with embedded 3.3V internal regulator to power internal PHY

Embedded voltage regulator (LDO) with configurable scalable outputs to power digital circuits

Voltage regulation in run and stop modes (5 configurable ranges)

Backup voltage regulator (~0.9V)

Reference voltage/VREF+ for analogue peripherals

Low power modes: sleep, stop, standby and VBAT support for battery charging

Low power consumption

Total current consumption down to 4μA

Clock management

Internal oscillators: 64kHz HSI, 48MHz HSI48, 4MHz CSI, 40kHz LSI

External oscillators: 4MHz - 48MHz HSE, 32.768kHz LSE

3 PLLs with fractional mode (1 for system clock, 2 for core clock)

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.