Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

Marvell® Alaska® X 88X3340 (88X3340-B0-BUT4C000) is a 4-channel Ethernet transceiver that is fully compliant with the IEEE 10GBASE-T standard and the NBASE-T Consortium specification. 2.5G and 5G operation via Cat5e cable. The Marvell Alaska X 88X3310/40P is manufactured using 28nm lithography to enable low-cost, low-power 1G/2.5G/5G/10Gbps Ethernet designs without the need for special optical modules in mainstream applications.

Target application

• 802.11ac access point backhaul

• Enterprise switches with 2.5G/5G/10G capabilities

• Data center 10GBASE-T switches and servers

88X3340 Features:

• 4-port, six-speed PHY. Operate on UTP copper cables at data rates of 10M, 100M, 1G, 2.5G, 5G or 10Gbps.

• Complies with IEEE 10GBASE-T specification for 10G mode and NBASE-T specification for 2.5G and 5G mode.

USXGMII, XFI, RXAUI, 2500BASE-X, 5000BASE-R, and SGMII system side interfaces on all devices.

• Single-port devices support XAUI interfaces.

• IEEE 1588v2 timestamp and SyncE support

MACsec functionality - fully 802.1ae compliant and supports the default cipher suite GMM-AES-128

• Integrated FIFO to absorb MACsec processing overhead; Can run in passthrough and store-and-forward modes

Complete IEEE MAC and MACsec statistics collected for all ports

High Energy Efficiency Ethernet (EEE) IEEE 802.3az for all supported data rates

• Automatic media detection for copper or fiber media plug and play

• Allows dense multi-port 10GbE or 2.5GbE/5GbE applications

• BER is better than 10-15

• The second SERDES channel can be used as a redundant XFI link to the host or as an optical interface on the line side

• 100m distance on Cat5e, suitable for 2.5G and 5G modes. 100m distance on Cat6a in 10G mode.

• Integrated Marvell Virtual CableTester® (VCT®) technology

• MDC/MDIO management port

• 23mmx23mm BGA package for X3340 four-port

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.