Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

Marvell® Alaska® 88E2010 (88E2010PA1-BUS4I000) is a new NBASE-T Alliance compliant Ethernet transceiver for 2.5G and 5G data rates over Cat5e cables. The device is manufactured using a 28nm process, which allows for lower cost and extremely low power consumption. These devices use digital signal processing (DSP) technology to enable data transfer rates of up to 5Gbps for low-cost Cat5e Ethernet cables, replacing optical technology for applications such as 802.11ac access point backhaul, switches, servers, workstations, and high-end PCS. The device supports Class 6 (shielded or unshielded), Class 6a (enhanced) and Class 7 cables, as well as Class 5e cables at distances up to 100m.

These devices support a variety of host interfaces (2500BASE-X, 5000BASE-R, SGMII) as well as 10G host interfaces such as USXGMII and Rate-matched XFI/RXAUI. The transceiver family is also fully backward compatible with low-speed legacy Ethernet (1000/100/10Mbps) on the line side.

Marvell Alaska 88E2010 also features Marvell's Advanced Virtual Cable Tester (VCT) technology for cable fault detection and active cable performance monitoring. With advanced digital signal processing (DSP) technology, the transceiver can actively monitor cable performance and determine cable length and type. It can detect open and short circuits and report the location of faults.

88E2010 Advantages:

• 1-port, 5-speed PHY, running at 10M, 100M, 1000M, 2.5G data rates on UTP copper cables

Comply with NBASE-T Alliance specifications for 2.5G and 5G modes

High Energy Efficiency Ethernet (EEE) IEEE 802.3az for all supported data rates

• BER is better than 10-15

• 100m distance on Cat5e, suitable for 2.5G and 5G modes

• Integrate Marvell Virtual Cable Tester ® (VCT®) technology

• MDC/MDIO management port

• Industry-leading lowest power consumption

• 5Gbps

• 2.5Gbps

• 1000 m/s

• 100Mbps

• 10Mbps

• 2500BASE-X

• 5000BASE-R

• Singapore International Immigration Department

• XFI and RXAUI match the rate

• XAUI with rate matching (88E2010 only)

• USXGMII

• Class 5e

• Category 6 (blocked or unblocked)

• Class 6a (Enhanced)

• Category 7

• BGA, 10x12mm, 0.8mm ball spacing

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.