Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

Marvell® Alaska® 88E1510P (88E1510PB2-NNB2I000) Gigabit Ethernet transceivers are physical layer devices that contain a single Gigabit Ethernet transceiver. The transceiver performs some of the Ethernet physical layer requirements of the 1000BASE-T, 100BASE-TX, and 10BASE-T standards. The transceiver is designed for industrial applications and enables real-time applications via PHY with low determinate latency. Higher-level protocols such as EtherCAT/Profinet can leverage this low-latency device to ensure quality of service for real-time automated systems.

Product advantage

PHY latency (transmission and reception) is reduced by up to 40% compared to non-optimized designs

• Total (RX+TX) latency < 400 ns (100BASE-TX and 1000BASE-T modes for 1518-byte frames)

• 88E1510Q Automatically enables Forced speed mode, Forced Cross mode, and programmable options after hardware configuration. These modes can greatly reduce connection and auto-negotiation times Support EEE (IEEE 802.3az) : EEE is executed on legacy or non-EEE MAC devices

• Save more energy by introducing the IEEE 802.3az standard

Accurate and low-cost clock recovery for time-sensitive applications

Enable applications such as industrial automation and wireless backhaul with highly accurate precision timing protocols

• Support for hardware accelerated 2-step PTP and 1-step PTP

• The device only needs a single 3.3V power supply to operate

• Save energy with programmable Lower Power (S5) event/mode and link change detection

Detect and report potential cable problems to within 1 meter of the point of failure

• Provides 16 PHY addresses for easier programming

• Industrial grade for normal operation in harsh environments ranging from -40 to +85 °C with a maximum joint temperature range of +125 °C

• Environmentally friendly and small form factor to achieve minimum space requirements

Target application

• Wireless backhaul applications

• Industrial automation

• Internet of Things (IoT) gateway

• Universal embedded controller

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.