Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The F2270NLGK8 is a low insertion loss Voltage Variable RF Attenuator (VVA) covering a broad frequency range from 5MHz to 3000MHz. In addition to providing low insertion loss, the F2270 provides excellent linearity performance over its entire voltage control and attenuation range. The device uses a single positive supply voltage of 3.15V to 5.5V.  Other features include the VMODE pin allowing either positive or negative voltage control slope vs attenuation and multi-directional operation, meaning the RF input can be applied to either RF1 or RF2 pins.  Control voltage ranges from 0V to 5V using either positive or negative control voltage slope.

Features

Low Insertion Loss: 1.1dB at 300MHz

Typical / Minimum IIP3 > 50MHz:  62dBm / 46dBm

Typical / Minimum  IIP2 > 50MHz:  98dBm / 77dBm

Up to 35dB attenuation range 

Bi-directional RF ports

+36dBm input P1dB compression

VMODE pin allows either positive or negative attenuation control response

Linear-in-dB attenuation characteristic > 50MHz

Supply voltage: 3.15V to 5.50V

VCTRL range: 0V to 5.0V

+105°C maximum operating temperature

3 x 3 mm, 16-QFN package

Typical Applications

CATV/Broadband Applications

Headend

Fiber/HFC Distribution Nodes

CATV Test Equipment

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.